Filter
Top Products
19
How to Operate by Remote Control
The supplied Remote Control is capable of directly control-
ling the functions of contemporary McIntosh Source Com-
ponents connected to the MA2275. Earlier McIntosh
source components and other brand source components can
be controlled by the MA2275 Remote Control with the ad-
dition of a McIntosh Remote Control Translator (RCT).
Note: Your McIntosh Dealer can assist you with the
installation and operation of the Remote Control
Translator (RCT).
Mute
Press the MUTE Push-button to mute audio at the Loud-
speaker and Headphone Outputs. Press MUTE a second
time to unmute audio.
Mode
Press the MODE Push-button to select between Stereo and
Mono Modes of operation.
Input Source Selection
Press one of the Input Push-buttons to select the desired
program source.
Disc Player, Music Server or Tape Recorder
Functions
Use these push-buttons to operate a Disc Player or Tape
Recorder.
Numbered Push-buttons
Press Push-buttons 0 through 9 to access tuner station pre-
sets or Disc chapters/tracks/discs.
Disc and Track
Use the DISC and TRACK Push-buttons when a Disc
Player, Music Server or Tape Recorder is being used.
Note: Certain Disc Players will require a Numbered Push-
button be pressed immediately after the Disc or Track
Push-button is depressed.
Volume
Press the UpS or DownT VOLUME Push-button to raise
or lower the listening volume level.
Note: The TAPE OUPUTS are not affected by volume
changes.
Tuner Push-buttons
Press the AM or FM push-button to select the desired
broadcast band. Press and release the CHANnel UpS or
DownTpush-button to move from station to station. Press
and hold a CHANnel UpS or DownT push-button to
move continuously from station to station. Press the +10
Push-button to start the automatic brief audition of each of
the presets stored in the tuner memory. Press the +10
Push-button a second time to stop on a station preset and
exit the review process.
Acc On/Acc Off
Press ACC ON Push-buton to switch the power ON to
certain McIntosh Disc Players. Press ACC OFF Push-but-
ton to switch the power OFF to certain McIntosh Disc
Players. The ACC ON/OFF Push-buttons also control the
signal at the ACCessory(B) Power Control Jack; it will also
remember the last command when the MA2275 is switched
Off and On again.
Pause
Press to perform various functions on a variety of McIn-
tosh Components. It will also pause the playing of a Disc or
Tape playback.
How to Operate by Remote Control