Filter
Top Products
17
ing the DSP/TIME Push-button on the Remote
Control. Refer to figure 12.
How to Play a CD Disc
With a disc already loaded into the MCD201, press the
PLAY Push-button on the Front Panel of the MCD201 or
Remote Control. Refer to figures 5, 6, 10 and 12.
How to Pause a Disc
This feature allows for the temporary stopping of disc
playback. Refer to figures 6 and 11.
1. When playing a Disc, press the PAUSE
Push-button
to temporarily stop playback.
2. Press the PLAY Push-button or press the PAUSE
Push-button a second time to cancel Pause and resume
playing the disc.
Track Back
Return to the beginning of the Track currently playing
by rotating the MCD201 Front Panel TRACK BACK
Control counterclockwise and then releasing the control
or momentarily pressing the BACK Push-button on
the Remote Control. Rotate and hold the TRACK BACK
Control or press and hold the BACK Push-button
for rapid selection of the desired previous Tracks. Refer to
figures 6 and 12.
Track Next
Advance to the next Track by rotating the MCD201 Front
Panel TRACK NEXT
Control clockwise and then re-
leasing the control or momentarily pressing the NEXT
Push-button on the Remote Control. Rotate and hold the
TRACK NEXT Control or press and hold the NEXT
Push-button for rapid selection of the next desired
Track. Refer to figures 6 and 12.
Fast Forward or Reverse
Press and release the FF (Fast Forward)
or REV (Re-
verse) Push-button to search back and forth rapidly
How to Operate the MCD201
through a Track on a disc at 4 times
the normal speed. To return to
normal playback, press and release
the same FF (Fast Forward) or
REV (Reverse) Push-button, press
the PLAY or press the PAUSE
Push-button. Refer to figures 6 and
12.
Note: The Fast Forward and Reverse
Modes work within the track
playing.
Stop Mode
Press the STOP Push-button at
any time to stop Playback. To listen
to the disc again, press the PLAY
Push-button and playback will start
from the beginning of the disc.
Volume Level
The MCD201 has both Fixed and
Variable Output Level Connections.
The Variable Output Level Connec
-
tions (Rear Panel and Front Panel
Headphone Jack) are controlled by
the Front Panel Level Control and
the Level Push-buttons on the Re-
mote Control. Refer to figures 6, 12
and 13. When the Level Control or
Push-buttons are operated, the Front
Panel Information Display will indicate the Volume Level
from 0 - 100%. Approximately 3 seconds after making any
changes to the Volume Level, the Information Display will
return to the previous indication.
Notes: 1. Wait until the Information Display returns to pre-
“Volume Level Adjustments” indication before enter-
ing any new operational commands.
2. When the Volume Level is 81%, the Rear Panel Vari-
able Outputs will be at the same volume level as the
Fixed Outputs.
Figure 12
Figure 13
Figure 10
Figure 11