Filter
Top Products
15
How to use the Remote Control
How to use the Remote Control
The Remote Control is capable of performing basic Oper-
ating Functions for the MCD201 SACD/CD Player.
Notes: 1. Refer to the “How to Operate” Section of this
manual for additional information using this Re-
mote Control.
2. The translucent Remote Control Push-buttons
will illuminate for approximately 3 seconds when
activated.
Play
With a disc loaded, press the PLAY Push-button to start
the disc playing.
Stop
Press the STOP
Push-button to stop disc playback and
return to displaying the table of contents of the disc.
Numbered Push-buttons
Press 1 through 9 to directly access one of the first nine
Disc Tracks using the Front Panel Information Display. For
track numbers greater than 10, press the Push-button of the
tens digit first and followed by the units digit. For example,
to access Disc Track 23, press the 2 push-button and then
the 3 push-button.
Pause
Press the PAUSE
Push-button to temporarily stop disc
playback at any time. Press the PAUSEPush-button a
second time to resume playback or just press the PLAY
Push-button.
REV and FF
Press and release REV (Reverse)
or FF (Fast Forward)
Push-button to start moving rapidly through a track on the
disc.
Back and Next
Press the NEXT
Push-button to move forward one track
or the BACK Push-button to move back to the begin-
ning of the current track playing.
Note: If the BACK Push-button is pressed during play-
back of the first three seconds of the track, the MCD201
will start playing back the previous track from the
beginning.
SACD/CD
Press the select the SACD or CD Tracks from a hybrid disc
for playback.
Display/Time
Press the DISPlay/TIME Push-button to access various
disc times. It also used to return the Front Panel Informa
-
tion Display to indicating time instead of text information
on a SACD Disc.
Menu/Text
Press to select the various text information on a SACD
Disc such as Album, Artist and Track Titles (disc depen
-
dent).
Repeat Modes
Press the RPT (Repeat) Push-button to select either the
One Track, All Tracks or cancel the Repeat Mode.
A-B Repeat
Press the A-B (Repeat) Push-button once to establish the
starting point of the repeat loop and press the A-B (Repeat)
Push-button a second time for the ending point, and that
segment of a disc to be repeated continuously.
Program
Press the PGM (Program) to activate the Programing mode
to playback only certain disc tracks in the desired order.
Review
Press the RVW (Review) Push-button to review the pro
-
grammed tracks from the disc on the Front Panel Informa-
tion Display, while in the program mode.
Clear
Press the CLEAR Push-button to erase a program track(s).