Filter
Top Products
6
Installation
Installation
The MA6300 can be placed upright on a table or shelf,
standing on its four feet. It also can be custom installed in
a piece of furniture or cabinet of your choice. The four feet
may be removed from the bottom of the MA6300 when it
is custom installed as outlined below. The four feet togeth-
er with the mounting screws should be retained for pos-
sible future use if the MA6300 is removed from the custom
installation and
used free standing.
The required panel
cutout, ventilation
cutout and unit
dimensions are
shown.
Always provide ad-
equate ventilation
for your MA6300.
Cool operation
ensures the longest
possible operating
life for any elec-
tronic instrument.
Do not install the
MA6300 directly
above a heat gen-
erating component
such as a high
powered amplifier.
If all the compo-
nents are installed
in a single cabinet,
a quiet running
ventilation fan can
be a definite asset
in maintaining all
the system compo-
nents at the coolest
possible operating
temperature.
A custom cabinet
installation should
provide the follow-
ing minimum spac-
ing dimensions for
cool operation.
Allow at least 6
inches (15.24cm)
above the top, 2 inches (5.08cm) below the bottom and 1
inch (2.54cm) on each side of the Integrated Amplifier,
so that airflow is not obstructed. Allow 19-1/2 inches
(49.53cm) depth behind the front panel. Allow 1-1/8 inch
(2.9cm) in front of the mounting panel for knob clearance.
Be sure to cut out a ventilation hole in the mounting shelf
according to the dimensions in the drawing.
6 -5/8"
16.83cm
17-1/16"
43.34cm
Cutout Opening for Custom Mounting
MA6300 Front Panel
Custom Cabinet Cutout
Cutout
Opening
for
Ventilation
Cutout Opening for Ventilation
Support
Shelf
Cabinet
Front
Panel
Chassis
Spacers
MA6300 Side View
in Custom Cabinet
MA6300 Bottom View
in Custom Cabinet
12"
30.48cm
14"
35.56cm
15-1/16"
38.26cm
12-15/16"
32.86cm
2"
5.08cm
6"
15.24cm
Opening
for Ventilation
Note: Center the cutout Horizontally on the unit.
For purposes of clarity, the above
illustration is not drawn to scale.
2-1/2"
6.35cm