Filter
Top Products
8
Speaker Wire Connections
Use the transparent 1/8" mini cable included in the StudioPro 3 package to connect the Left and Right
speakers via the 1/8" mini jacks on the back of each speaker.
Connecting to a Computer Sound Card or Other Audio Output Device
Before connecting the StudioPro 3 monitors, make sure the power from the computer or other output
device has been turned off and the StudioPro 3 system is also turned off.
Plug the RCA cable to the corresponding output connectors of a computer sound card, portable music
player, etc. You can also use the black 1/8" stereo mini cable to connect a secondary audio device to the
“Aux” input on the front of the StudioPro 3.
Setting the “Bass Boost” EQ Switch
This 2-position switch provides a subtle increase in bass response. The On mode increases the
low-frequency gain slightly via the woofer and bass-reflex port. The Off mode produces a natural, even
response for most listening conditions.
Please see Appendix C for the “Bass Boost” frequency response curve.