Filter
Top Products
11
StudioPro 3 User Guide
English
Your StudioPro 3 Warranty
Warranty Terms
M-Audio warrants products to be free from defects in materials and workmanship, under
normal use and provided that the product is owned by the original, registered user. Visit
www.m-audio.com/warranty for terms and limitations applying to your specific product.
Warranty Registration
Thank you for registering your new M-Audio product. Doing so immediately both entitles you to full
warranty coverage and helps M-Audio develop and manufacture the finest quality products available.
Register online at www.m-audio.com/register to receive FREE product updates and for the chance to win
FREE M-Audio gear.
Appendices
Appendix A - Technical Specifications
Type:
Two-way desktop reference monitor
LF Driver:
3" diameter, magnetically shielded with curved cone with high-temperature
voice coil
HF Driver:
1" diameter, magnetically shielded silk dome
Frequency Response:
100 Hz - 20 kHz ±3 dB
Crossover Frequency:
2.3 kHz
RMS SPL:
101.5dB @ 1 meter
Dynamic Range:
(Maximum Signal-to-Noise Ratio):
> 80 dB (typical A-weighted)
S/N Ratio:
>90dB (typical, A-weighted)
Input Connectors:
left and right RCA Line input connectors
Polarity:
positive signal at
“+” input produces outward low-frequency cone
displacement
Dynamic Power:
10 watts RMS into 4 Ω per channel @ 0.5% THD
Input Impedance:
10 k Ω unbalanced
Input Sensitivity:
100 mV pink noise input produces 90 dBA output SPL at 1 meter with
volume control at maximum
Protection:
RF interference, output current limiting, over temperature, turn on/off
transient, subsonic filter
Indicator:
Blue power LED ring around “on/off/volume” knob on front panel
Power Requirements:
100-120V/~60Hz, 220~240V/~50Hz; powered via detachable 2-conductor
line cord
Cabinet:
vinyl-laminated MDF
Dimensions:
7.9" (H) x 5.5" (W) x 5.9" (D)
Weight:
8.8 lbs./pair (approx., without packing)
Specifications subject to change without notice