Filter
Top Products
4
Mark Levinson
Product Registration
Register your Nº532 online at www.marklevinson.com within 15
days of purchase. Retain the original, dated sales receipt as proof of
warranty coverage.
Installation Considerations
The Nº532 dual monaural power amplifier requires special care
during installation to ensure optimal performance. Pay particular
attention to instructions included in this section and to precautions
included throughout this owner’s manual.
Unpacking DO save all packing materials for possible future shipping needs.
DO inspect the Nº532 for signs of damage during shipment. If
damage is discovered, contact your authorized Mark Levinson
dealer for assistance in making appropriate claims.
DO locate and remove the accessory bag from the carton. Make
sure it contains all of the items listed in the “What’s in the Box”
table on the previous page. If not, contact your authorized Mark
Levinson dealer.
Caution! DO NOT attempt to lift or move the N
o
532 power amplifier
without adequate assistance. The shipping weight of the N
o
532
exceeds what a single person should lift alone. To avoid injury or
damage to the N
o
532, at least two people are required to lift or
move the amplifier.
Two pairs of knit white gloves with special gripping surfaces on
the palms and fingers are included with the N
o
532 . Wear these
gloves when lifting or moving the amplifier.
Placement and
Ventilation
DO install the Nº532 power amplifier on its own shelf for proper
ventilation.
DO install the Nº532 chassis on a solid, flat, level surface.
DO install the Nº532 power amplifier close to associated
components to keep interconnecting cables as short as possible.
DO select a dry, well-ventilated location out of direct sunlight.
DO allow at least 3 to 4 inches (8 to 10cm) of clearance above and
on each side of the amplifier for proper heat dissipation.