Filter
Top Products
17
Nº532 Power Amplifier
4. Click the Properties button to open the Local Area Connection
Properties menu.
Note If the computer is not currently connected to an active network, Step 3
has already opened the Local Area Connection Properties menu.
5. Click on Internet Protocol (TCP/IP) line item so that it is
highlighted.
6. Click the Properties button.
7. Select the “Use the following IP address” option. The IP address,
Subnet mask, and Default gateway boxes are no longer grayed
out and can now be modified.
8. Enter the following values:
• IP address: 192.168.50.x
where x stands for a number other than 3
• Subnet mask: 255.255.255.0
• Do not enter a value in the Default gateway parameter.
Note 192.168.50.3 is the default Static IP address for the Nº532. The
computer must be on the same subnet and have a unique address.
9. Click “OK” to save and exit the menu.
10. Open the Internet Explorer Web browser.
11. From the menu bar, select the Tools Internet Options menu.
12. Select the Connections tab.
13. Click the LAN Settings button.
14. Verify that “Use a proxy server for your LAN” is NOT checked.
15. Click “OK” to save and exit the program.
Connecting With
Static IP Addressing
If you plan to connect with static IP addresses (DHCP is turned off),
use this procedure. Otherwise, skip to the next procedure to
connect directly to a computer.
Connect one Nº532 power amplifier to the router, as described in
the earlier “Connecting the Cables” section. Make sure that
everything is powered off before making cable connections.