Filter
Top Products
27
Nº532 Power Amplifier
Specifications
All specifications are subject to change without notice.
Input & Output Connectors •two balanced XLR inputs
• two unbalanced RCA inputs
• two “Hurricane” loudspeaker outputs with banana-plug sockets
(banana-plug socket not available on the 230 VAC models)
Control Connectors • two Link2 ports
• one Ethernet port
• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
• 3-pin IEC standard power connector
Rated Output Power 20Hz to 20kHz at <0.5% THD, 400W per channel @ 8 Ω,
full output from 2.59Vrms
Frequency Response within 0.1dB from 10Hz to 20kHz
Signal-to-Noise Ratio >85dB, reference level: 2.83 Vrms
Input Impedance 100 kΩ (balanced); 50 kΩ (unbalanced)
Voltage Gain 26.8dB
Input Sensitivity 2.83Vrms output at 130mVrms input
Output Impedance <20 mΩ, 20Hz to 20kHz
Power Requirements 100V∼, 120V∼, 230V∼, 800W, factory set for destination country
Dimensions • Height (with feet): 9.55 in (242.57mm)
• Height (without feet): 8.75 in (225.25mm)
• Width: 17.5 in (444.50mm)
• Depth: 21.1 in (535.85mm)
Weight • Net weight: 121.5 lbs (55.22kg)
• Shipping weight: 129.5 lbs (58.86kg)
Operating Environment
• Operating temperature: 0
o
to 35
o
C (32
o
to 95
o
F)
• Storage temperature: –30
o
to 75
o
C (–22
o
to 167
o
F)
• Relative humidity: 95% maximum without condensation