Marantz ZC4001 Stereo Amplifier User Manual


 
ENGLISH
9
2. LISTENING TO SOURCES OVER THE PLC (CD,
TAPE, CDR, DVD, TV, VCR1, DSS OR AUX1)
To listen to these sources, the ZR6001 must be
connected to the unit and set accordingly. For
details, see the ZR6001 Users Guide.
1.
Press the button of the desired source.
2.
Operate the source with the PLAY, STOP,
PAUSE, , , and buttons.
3. LISTENING TO SOURCES CONNECTED TO EXT
INPUT
1.
Press the EXT. button.
2.
Operate the unit connected to the EXT INPUT
jack on the rear panel.
LISTENING OVER THE PLC
Check the settings of the ZR6001.
Using the OSD menu system of the ZR6001, set
MULTI PLC SERVER to ON.
For details, see the ZR6001 Users Guide.
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
1. LISTENING TO THE TUNER
1.
Press the TUNER button.
2.
To switch between FM and AM, press the
TUNER button again.
3.
To select a station frequency, use the /
buttons.
4.
To select a preset station, use the /
buttons. (With the ZR6001, this works only
when stations have been preset.)
BASIC OPERATION
TURNING THE POWER ON
1.
Press the POWER button to turn the power
ON.
When the power turns ON, the ZC4001
resumes the same status that existed when
power was turned OFF the last time.
2.
Press the POWER button again to set the
ZC4001 on standby.
Caution:
Power to the ZC4001 is always ON (standby
state) while the AC power cable is connected to a
wall electrical outlet.
To completely shut OFF the power, unplug the
AC power cable from the wall electrical outlet.
However, if the AC power cable is left unplugged
for an extended period of time, the clock resets
and the time must be set again.
1. 2.
STANDBY
POWER
ON/STANDBYON/STANDBY
1 .
ADJUSTING THE VOLUME
1.
Press the VOLUME / buttons to adjust
the volume.
Pressing the VOLUME
button increases
the volume.
Pressing the VOLUME
button decreases
the volume.
Volume can be adjusted in the (Min.) 01 -
(Max.) 79 range.
Pressing and holding the VOLUME
/
buttons increases or decreases the volume
rapidly.
MUTE
Pressing the MUTE button temporarily mutes the
sound from the speakers.
Pressing the MUTE button again cancels the mute
and restores the original volume level.
1 .
STANDBYSTANDBY
POWERPOWER
ON/STANDBYON/STANDBY
1. 2. 4.3.
1
.
1 .
1.
9MULTI PLC
MULT I
CONNECT I ON MODE :
AUTO
H IGH AUDI O QUAL I TY
HIGH RELIABILITY
GP
ID SETTING:START
MA I N EX I T
PLC SERVER:ON
1
.
2.1. 2.
1.
1
.
06.3.30, 9:10 AMPage 9