Filter
Top Products
ENGLISH
7
SLEEP TIMER SETTING
When the set time elapses, the ZC4001
automatically goes on standby.
The sleep timer can be set to 10, 20, 30, 40, 50, 60,
70, 80 or 90 min.
1.
Press the ENTER button.
2.
Press the ENTER button again.
3.
Select the sleep time. Each time the button
is pressed, the sleep time changes in the
order of
OFF → 10 → 20 → 30 → 40 → 50 → 60 → 70
→ 80 → 90 → OFF.
Each time the button is pressed, the sleep
time changes in the order of
OFF → 90 → 80 → 70 → 60 → 50 → 40 → 30
→ 20 → 10 → OFF.
4.
Press the ENTER button to return to the
normal display.
1. 2. 4. 3.
1
.
BASS BOOST SETTING
The Bass Boost feature is turned ON/OFF as
follows.
When ON, bass tones are accented. When OFF,
normal audio is produced.
1.
Press the ENTER button once, then press the
button twice.
2.
Press the ENTER button again.
3.
Each time the button is pressed, the Bass
Boost setting switches between ON and OFF.
ON ↔ OFF
4.
Press the ENTER button to return to the
normal display.
1. 2. 4.1. 3.
1 .
WAKE UP TIMER
The Wake Up Timer outputs an audio alarm at the
set time. The volume level of the alarm can be
user-set.
1.
Press the ENTER button once, then press the
button.
2.
Press the ENTER button again.
3.
Each time the and buttons are pressed,
the Wake Up Timer switches between “ON”
and “OFF”.
4.
Press the button to get the hour setting.
Press the
and buttons to set the hour.
5.
Press the button to get the minutes setting.
Press the
and buttons to set the
minutes.
1
.
1. 2.
6. 7. 8.
3. 4.
5. 6. 4. 5.1.
6.
Press the ENTER button again.
Press the and buttons to set the volume
of the alarm.
7.
Press the ENTER button to return to the
normal display.
When the Wake Up Timer is turned ON, a
symbol
appears in front of the time display.
8.
When the set time is reached, an audio alarm
outputs. If not stopped, the alarm gradually
gets louder. To stop the alarm, press the
ENTER button.
The Wake Up Timer can be set when the
Standby Mode is set to “NORMAL”.
06.3.30, 9:10 AMPage 7