Filter
Top Products
ENGLISH
33
3 SURROUND SETUP
This menu is for setting surround effect parameters
for the various surround input signals so as to bring
out the live audio effect of your speaker system.
•
CHANNEL LEVEL:
“3-1 CHANNEL LEVEL”
(see page 33)
•
PL
II
x MUSIC PARAMETER:
“3-2 PLII x MUSIC PARAMETER”
(see page 34)
•
CS
II
PARAMETER:
“3-3 CSII
PARAMETER”
(see page 34)
•
NEO:6 PARAMETER:
“3-4 NEO:6 PARAMETER”
(see page 34)
1.
Select “3. SURR SETUP” from the MAIN
MENU with the 3
or
4 cursor buttons and press
the OK/ENTER button.
2.
Select the desired menu with the 3
or
4 cursor
buttons and press the OK/ENTER button.
3.SURR SETUP
CHANNEL LEVEL
PL x MUSIC PARAMETER
CS PARAMETER
NEO:6 PARAMETER
RE-EQ : OFF
LFE LEVEL :
RETURN NEXT EXIT
RE-EQ:
Turns THX Cinema Re-EQ™ on and off.
Select the Cinema Re-EQ™ with the 1 or 2 cursor
button to activate it.
LFE LEVEL:
Select the output level of the LFE signal included
in the Dolby Digital signal or the DTS signal.
Select “0dB”, “–10 dB” or “OFF” with 1 or 2 cursor
button.
After you complete this portion of the setup, move
the cursor to “RETURN” with the 3, 4, 1, 2 cursor
buttons and press the OK/ENTER button.
Note:
• After you complete this portion of the setup, press
the OK/ENTER button to move the cursor to
“RETURN” and press the OK/ENTER button
again to go to sub-menu.
3.SURR SETUP
CHANNEL LEVEL
PL x MUSIC PARAMETER
CS PARAMETER
NEO:6 PARAMETER
RE-EQ : OFF
LFE LEVEL :
RETURN NEXT EXIT
CHANNEL LEVEL
SURR.MODE:
AUTO
CENTER : 0.0dB
SURR.R : 0.0dB
SURR.B R : 0.0dB
SURR.B L : 0.0dB
SURR.L : 0.0dB
SUB W : 0.0dB
RETURN EXIT
NEO:6 PARAMETER
CENTER GAIN : 0.3
RETURN NEXT EXIT
PL x MUSIC PARAMETER
PARAMETER :DEFAULT
PANORAMA :OFF
DIMENSION : 0
CENTER WIDTH: 3
RETURN NEXT EXIT
CS PARAMETER
TRUBASS : 0
SRS DIALOG : 0
RETURN NEXT EXIT
☞
P. 34
☞
P. 33
☞
P. 34
☞
P. 34
3-1 CHANNEL LEVEL
1.
Select “3. SURR SETUP” from MAIN MENU
with 3
or
4 cursor buttons and press the OK/
ENTER button.
2.
Select “CHANNEL LEVEL” with the 3
or
4
cursor buttons and press the OK/ENTER
button.
3.
Set the SURR. MODE with the 1
or
2 cursor
buttons.
CHANNEL LEVEL
SURR.MODE:
AUTO
CENTER : 0.0dB
SURR.L : 0.0dB
SURR.R : 0.0dB
SURR.BACK L : 0.0dB
SURR.BACK R : 0.0dB
SUB W : 0.0dB
RETURN EXIT
4.
Select the desired menu item with the 3
or
4
cursor buttons, set the desired level with the 1
or
2 cursor buttons, and press the OK/ENTER
button.
SURROUND MODE:
The surround mode can be independently set for
3 modes.
1. Multi Ch STEREO
2. CSII
3. Others
CHANNEL LEVEL
CENTER LEVEL:
Set the effect level of the center speaker between
–12 and +12 level in 0.5 level interval .
• If “NONE” was selected for the center speaker
setting in the SPEAKER SIZE, then this setting will
not appear.
SURR L or R LEVEL:
Set the effect level of the Surround speaker
between –12 and +12 level in 0.5 level interval .
• If “NONE” was selected for the surround speakers
setting in the SPEAKER SIZE, then this setting will
not appear.
SURR. BACK L or R LEVEL:
Set the effect level of the Surround Back speaker
between –12 and +12 level in 0.5 level interval .
• If “NONE” was selected for the surround back
speakers setting in the SPEAKER SIZE, then this
setting will not appear.