Filter
Top Products
19
ENGLISH
ENTER THE DESIRED MENU ITEM OF THE
SETUP MENU
1.
Turn on this unit.
2.
Press the AMP button to set the amp mode.
3.
Press the MENU button or the OK button to enter the SETUP
MENU.
4.
Press the or cursor button to select the MAIN MENU item.
5.
Press the OK button or the MENU button to enter the desired
menu item.
After finishing all setup, press the MENU OFF button to exit the
SETUP MENU.
1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT)
Four digital inputs can be assigned as the desired source.
Use this menu to select the digital input jack to be assigned to the
input source.
The Input Setup consists of 9 items, which are as below.
• D1AUTO to D4AUTO : Digital AUTO mode
If the input signal from the selected source is digital signal, this unit
chooses a digital input automatically.
• DIG.1 to DIG.4 : Digital FIXED mode
The SR4300 chooses a digital input regardless of a input signal from
the selected source.
• ANA : Analog mode
Use this menu to select the digital input jack to be assigned to the
input source.
1.
Select “1.INPUT” in SETUP MAIN MENU with the or cursor
button.
2.
Press the OK button to enter the menu.
3.
Press the or cursor button to select the input source.
4.
Press or cursor button to select the input function.
Select “DxAUTO”, “DIG.x” or “ANA” for input sources.
5.
If you finish these setup, press the or cursor button to select
“TO MAIN MENU” then press the OK button to return the SETUP
MAIN MENU.
Or press the or cursor button to select “EXIT” then press the
OK button to exit the SETUP MENU.
Notes:
• When a DTS-LD or DTS-CD is playing, this setup is not
available. This is to avoid noise being generated from the
analog input.
• If “Dx-AUTO” is selected and a DVD, compact disc or LD is
fast forwarded during playback, decoded signals may produce a
skipping sound. In such cases, change the setting to DIGITAL.
• Same digital input function cannot be set. In this case, the
previous setting is set to ANALOG. Same digital input number
cannot be set in Digital AUTO mode and Digital Fixed mode.
For example, D1AUTO and DIG.1 are not set at same time.
SYSTEM REMOTE CONTROLLER RC4300SR
VCR1
DVD
TAPE
MD
OFF
OK
CHANNEL/SKIP
ATT.
TV
CDR
BASS
897
0
MENU
VOLUME
MUTE
CD
AMP
6.1CH
-IN
2CH
M-CH
ST
A/D
TUNE/SEARCH
NIGHT
TUNER
SETUP/T.TONE
S-DIRECT
MODE
DISP./RDS
PTY
P.SCAN
VCR2
DSS
F.DIRECT
OK
AMP
OFF
MENU
4.
2.
5.
3.
EXIT
OFF
OK
BASS
897
0
MENU
VOLUME
MUTE
6
.
1CH
-IN
2CH
M
-
CH
ST
A/D
NIGHT
SETUP/T.TONE
S-DIRECT
F.DIRECT
OK
4. 5.
2. 5.
1. 3. 5.