Marantz SR-14EX Stereo Receiver User Manual


 
ENGLISH
13
TONE
treble (^ :up /
v
: down ) buttons
These buttons are used to adjust the tone of high-frequency sound.
bass (^ :up /
v
: down ) buttons
These buttons are used to adjusts the tone of low-frequency sound.
Source Direct button
This button is used to transmit the signals by bypassing the tone
control circuitry. Therefore, the signals can be reproduced with
higher quality.
Night Mode button
This button is used to set night mode. This feature reduces the
input level of dolby digital sources by 1/3 to 1/4 at their loudest
thresholds, preventing the dynamic range or loud sounds without
restricting the dynamic range or volume of other sounds or at less
than maximum levels.
TUNE
AM ,(LW) ,FM buttons
These buttons are used to switch between FM, AM, and LW mode of
the tuner.
LW button is not available in SR-14EX.
Seek (^ :up / v : down ) buttons
These buttons are used to change the frequency.
Preset (^ :up / v : down ) buttons
These buttons are used to change the preset station.
Stereo/Mono button
This button is used to select the auto stereo mode or mono mode.
Preset Scan button
This button is used to start a scan automatically through the
stations preset into the receiver’s memory.
KEYPAD
ten keypad (0,1 - 9)
These buttons are used to change the preset station or input
frequency directly.
Memo button
This button is used to enter the tuner’s preset memory numbers and
station names.
Clear button
This button is used to cancel certain memory or programming
operations.
F/P buttons
This button is to select the display for frequency or preset channel .
PTY button
Selects PTY function in RDS (Radio Data System) by this button.
*This button is not available in SR-14EX.
D-Mode button
Selects display mode function in RDS (Radio Data System) by this
button.
*This button is not available in SR-14EX.