Filter
Top Products
ENGLISH
18
SYSTEM SETUP 1/2
VCR1 OUT : Select the video source from the VCR1 output with <
or > button for video and audio dubbing to the VCR1
deck.
The source is switched in the following sequence.
SOURCE → TV → LD → DVD → DSS/VCR2 → AUX
→ SOURCE → .....
To determine each source, display the desired
source and press the ^ or v button.
TAPE OUT : Select the audio source from the TAPE output with <
or > button for audio dubbing to the tape deck. The
source is switched in the following sequence.
SOURCE → TUNER → CD → CD-R/MD → SOURCE
→ ....
To determine each source, display the desired
source and press the < or > button.
DIG. OUT : Select the digital source from the DIGITAL output
with < or > button for digital dubbing to a CD-R
recorder or MD deck.
The source is switched in the following sequence.
SOURCE → DIG.1 → DIG.2 → DIG.3 → DIG.4 →
OFF→ SOURCE →
To determine each source, display the desired
source and press the ^ or v button.
TV AUTO: This product is equipped with a TV-auto ON/OFF
system, which automatically turns on or off the SR-
14EX power 1 second (for ON) and up to to 5
minutes (for OFF) after the TV video input signal is
present or absent.
Switch the TV AUTO ON/OFF function to enable or
disable with or button. To use this function, connect
the TV video input to TV tuner’s video output.
OSD Info : If you select enable, SR-14EX will display the status
of the feature (Volume up/down, input select, etc..)
on the TV monitor.
But if you do not desire this information , select
“DISABLE “.
S.P.C. : System Power Control : If you select “ENABLE”, the
SR-14EX will output a power On/Off command for a
CD player, MD player, or DVD player, from the
remote output terminal.
If you have corresponding marantz products , you
can turn them on/off simultaneously with SR-14EX.
6CH. INPUT: 6 channel direct inputs on the SR-14EX share the
front channel of the desired source.
Select the desired source with < or > button.
DIGITAL 6 : The input of the Digital 6 terminal is commonly used
with an AC-3 RF input or Coaxial Digital Input.
If Digital 6 is connected to the AC-3 RF output of a
LD player, select “ RF “ with < or > button.
If you desire to connect this terminal to the digital
output of a CD player, DVD player, SAT tuner or
etc… . select “ COAXIAL “.
SYSTEM SETUP 2/2 (ASSIGNABLE DIGITAL INPUT)
Six digital inputs can be assigned as the desired source.
Use this menu to set the SR-14EX for connected equipment and type
of connection.
Example:
When the digital output of a DVD player is connected to Digital 4
(input jack) of the SR-14EX and an AC-3 RF output and optical digital
output from a LD player are connected to AC-3 RF(Dig.6) and Dig.1.
1. Move the cursor on the DVD with ^ or v button, and select
DIGITAL4 with <, > button.
2. Move the cursor on the “LD” with ^ or v button, and select RF with
< button, and select DIGITAL1 with > button.
(Move the cursor with ^ or v button, input is determine.)
Notes
• The TUNER and AUX are fixed to the analog input, and cannot
be selected for any digital input.
The RF input is available for LD , and can be linked with Digital
1,2,3 ,4 or 5.
If the RF input is linked with any Digital input, once the RF signal
is not supplied, the SR-14EX will switch from the RF input to the
digital input automatically.
• If you connect an LD player, you should connect not only the RF
output (if it has one) but also the Digital output.
Laser Discs which are not encoded with Dolby Digital will then
send the sound through the digital output (PCM audio). If the
disc you are playing is old and doesn’t have a digital soundtrack,
you must connect the L/R analog outputs on the laser disc player
to the laser disc analog inputs on the SR-14EX.
• When a DTS-LD or DTS-CD is playing, this setup is not available.
This is to avoid noise being generated from the analog input.
In this case, the DTS audio must be played through the player’s
digital output to the digital input on the SR-14EX. This is because
the DTS soundtracks replace the standard PCM soundtracks on
DTS discs.
• The SR-14EX does not switch from digital input to analog input or
vice versa automatically.
In case both digital and analog inputs are connected to the SR-
14EX,if you desire to switch to analog input temporarily, you can
do so by pressing the A/D button.
• If you select “Digital-6: COAXIAL” in Setup 1/2. RF is not
available in this page.
MEESS STTUPY
:
EX IT
1/2
VCR1 OUT SOURCE
:OUT SOURCE
:
:
OUT SOURCE
TAPE
DIG
DIG
.
TV AUTO
_
_
DISABLE
:
:
:
DISABLE
:ENABLEOSD I NFO
S.P.C.
6
6
CH I
I
NPUT
OFF
TAL
R
F
RUNTER NEXT
MEESS STTUPY
:
EX IT
2/2
CD
CD
:
:
:
TAPE
R
DSS
TV
_
:
:
:
:LD
DVD
VCR1
RF
RUNTER
1
4DIGITAL
DIGITAL
ANALOG
ANALOG
ANALOG
ANALOG
ANALOG
ANALOG