Filter
Top Products
20
ENGLISH
HOW TO USE AND SET FEATURES
REMOTE POWER CONTROL
By connecting this unit to a Marantz SC-11S1 stereo control
amplifier using the remote power control connection, the power
controls of this unit are operated in sync with the SC-11S1
power ON/OFF controls.
The SC-11S1 has two trigger output terminals, therefore two
SM-11S1s can be connected to one SC-11S1.
1. Prepare the correct number of double-ended mini plug
audio connection cables for the number of SM-11S1s to
be connected. Either of the following types of connection
cables are adequate.
Caution:
Do not use connecting cables that contain resistance.
• Monaural miniplug monaural miniplug connecting
cable
• Stereo miniplug stereo miniplug connecting cable
2. Check that the power to the unit and SC-11S1 that will be
connected to it are both OFF.
3. After completing the connections shown below, switch the
remote power control ON/OFF switch on the rear panel of
the unit to ON.
4. Press the POWER ON/OFF switch on the unit to switch to
standby mode.
5. In this condition, press the POWER ON/OFF switch on the
SC-11S1, and the power of the SM-11S1 will switch ON in
sync.
AC IN
REMOTE POWER CONTROL
TRIGGER OUT
12
AC IN
ON
OFF
TRIGGER IN
REMOTE POWER CONTROL
AC IN
ON
OFF
TRIGGER IN
REMOTE POWER CONTROL
REMOTE POWER CONTROL
TRIGGER OUT
12
ON
OFF
TRIGGER IN
REMOTE POWER CONTROL
ON
OFF
TRIGGER IN
REMOTE POWER CONTROL
SC-11S1
SM-11S1
SM-11S1
Set to ON
Set to ON