Filter
Top Products
4
ENGLISH
NAMES AND FUNCTIONS OF PARTS
DISPLAY
DISPLAY
POWER ON/OFF
POWER ON/OFF
METER
METER
MODE
MODE
BALANCED
BALANCED
UN-
UN-
BALANCED
BALANCED
SPEAKERS
SPEAKERS
1
SPEAKERS
SPEAKERS
2
STANDBY
STANDBY
qow
y
u i e tr
q POWER ON/OFF Switch
This switch turns power to the SM-11S1 ON and OFF.
When pressed, power is activated and the blue indicator
in the display w lights up. Pressing the switch again turns
the power OFF.
w Display
The monitor displays the output power to the speakers,
and setting status of the various setting modes.
e UNBALANCED Input Selection Button
This button switches the input signal from the
UNBALANCED terminal on the rear panel ON/OFF.
Press this button for 3 seconds or more to set the gain
settings for the input signal from the UNBALANCED
terminal. For instructions on BALANCED INPUT /
UNBALANCED INPUT GAIN SETTING, see pg. 18.
r Balanced Input Selection Button
This button switches the input signal from the BALANCED
terminal on the rear panel ON/OFF.
Press this button for 3 seconds or more to set the gain
settings for the input signal from the BALANCED terminal.
For instructions on BALANCED INPUT / UNBALANCED
INPUT GAIN SETTING, see pg. 18.
t METER MODE Button
This button changes the display to digital power meter
display mode. For more information on HOW TO USE
THE METER BUTTON (DIGITAL POWER METER), see
pg. 18.
y Illumination Lamp
The illumination lamp casts a blue light over the switches
and buttons.
It can be turned ON and OFF with the DISPLAY button.
For instructions on HOW TO OPERATE THE SIDE
ILLUMINATION, see pg. 19.
u DISPLAY Button
This button turns the display and side illumination ON and
OFF. For instructions on HOW TO OPERATE THE SIDE
ILLUMINATION, see pg. 19.
i SPEAKERS 1 Button
This button switches the speaker output signal from the
SPEAKERS 1 terminal on the rear panel ON/OFF.
o SPEAKERS 2 Button
This button switches the speaker output signal from the
SPEAKERS 2 terminal on the rear panel ON/OFF.
FRONT PANEL