Marantz SA-7S1 CD Player User Manual


 
4
ENGLISH
NOTES ABOUT THE DISCS
* Handle the discs carefully so as not to scratch their
surfaces.
* Keep the surfaces of the discs clean at all times.
When cleaning the surfaces of discs, always be sure to use
the special cleaner and wipe the surfaces in the directions
shown in the figure below.
* Do not attach pieces of paper or stickers to the label
surfaces of the discs.
When a disc has a piece of plastic tape or rental CD label
with paste protruding from the edge or when a disc still bears
traces of sticky tape or adhesive labels, do not attempt to
play it. If such a disc is played on the CD player, you may
find that you cannot remove it or that some other kind of
malfunctioning may occur.
* Do not use discs which come in special shapes.
Do not attempt to play heart-shaped or octagonal discs or
discs with any other special shapes. You may find that you
cannot remove them or that some other kind of malfunctioning
may occur in the player.
* Use discs which satisfy the CD standards such as those
with the “CD logo” or “
” mark on their disc label
surfaces.
No guarantees are made for playback if discs which do not
satisfy the appropriate CD standards are used.
Similarly, no guarantees are made for their sound quality even
if it is possible to play such discs.
* To protect your discs from damage, avoid placing them
in the following locations.
Where they will be exposed to direct sunlight or where they
will be close to a heater or other heat-radiating appliance
Where the humidity level is high or it is very dusty
Near a window or other such location where they may be
exposed to rain
* Get into the habit of putting the discs back in their cases
after use.
BEFORE USING
Wipe the surface radially
from the center.
Do not wipe the surface in
the circumferential direction.
INAPPROPRIATE PLACES FOR
INSTALLATION
To keep your player in perfect working order for the longest
possible time, avoid installing the player in the following
locations.
Wherever it will be exposed to direct sunlight
Wherever it will be close to a heater or other heat-radiating
appliance
Wherever the humidity is high or ventilation is poor
Wherever it is very dusty
Wherever it will be subject to vibration
On top of a rickety stand or in an unstable location which is
tilted at an angle
In an audio rack with little space at the top and bottom or
other location where the heat dissipation will be obstructed
To ensure proper heat dissipation, install the player while
leaving clearances between the player and wall or other
components, as shown in the figure below.
On top of an amplifier or other component which dissipates
a great deal of heat
* The quality of the laser and other components can be
harmed if the player is placed directly on top of an
amplifier or other device which generates heat.
7
Do not place objects on top
Refrain from placing any objects on top of the player.
7 Cautions on handling power cord
Do not touch the power cord with wet hands.
When disconnecting the power cord, always make sure
that you take hold of the plug. Yanking out or bending the
cord can damage it and/or cause electric shocks or a fire.
Get into the habit of disconnecting the power plug before
leaving home.
7 Do not attempt repairs yourself
Refrain from lubricating the player: doing so can cause
malfunctioning.
Only qualified engineers with specialized expertise are
authorized to repair the pick-up and parts inside the player.
4 ins. (0.1 m)
or more
4 ins. (0.1 m) or
more
4 ins. (0.1 m)
or more
4 ins. (0.1 m) or more
06.8.29, 1:51 PMPage 4