Filter
Top Products
13
ENGLISH
To start playback form the first track
Press
PLAY
button.
To stop playback
Press
STOP
button.
To eject disc
Press
OPEN/CLOSE
button to open the disc tray and take the
disc off. Press the button again to close the tray.
Disc tray must be closed when the unit is not be used.
To pause playback
Press
PAUSE
button.
PAUSE indicator will light and playback is paused at the point
that the button is pressed. To restart playback, press
PAUSE
button again or press
PLAY
button.
To change time display
Press the
TIME
button on the remote control.
Each time
TIME
button is pressed, display will change in the
following order. “Track elapsed time” → “Track remaining time”
→ “Total remaining time” → “Track elapsed time”.
• Track remaining time
(The remaining playing time from the playing point to
the end of the current track)
• Total remaining time
(The remaining playing time from the playing point to
the end of the last track)
* If
TIME
button is pressed when Super Audio CD disc that
supports text is in use, time display is given priority and the
text information will not be displayed afterward. To see the
text information, press
TEXT
button.
7 Switching Sound Mode
(Super Audio CD)
q Press
SOUND MODE
button in stop mode (not
playing).
The currently selected layer or area is shown on the LCD.
(CD or Super Audio CD)
If
SOUND MODE
button is pressed again, a playable layer or
area will be shown, and the layer or area will be switched
to new one.
* When layer or area is switched, TOC will be read again.
* The sound mode cannot be changed for Audio CDs and
discs with only a Super Audio CD area.
* The sound mode on hybrid layer discs will be changed in
the following order.
Super Audio CD stereo area → CD layer → Super Audio
CD stereo area
* Sound mode can be selected while the tray is open. Select
a desired layer or area and press
PLAY
button then
the tray will close and playback will be started.
w
Press the
SOUND MODE
button during playback.
The currently selected layer or area is shown on the LCD.
(CD or Super Audio CD)
If
SOUND MODE
button is pressed again, the playback is
stopped, and the layer or area will be switched to new one.
When you want to listen at that area, press
PLAY
button
again. The playback will be started.
“–” is displayed
“REMAIN”
is displayed
“–” is displayed
“TOTAL REMAIN”
is displayed
Button
OPERATION
06.8.29, 1:52 PMPage 13