Filter
Top Products
13
NAMES AND FUNCTIONSBASIC CONNECTIONSBASIC OPERATIONS
ADVANCED CONNECTIONS
ADVANCED OPERATIONSTROUBLESHOOTINGOTHERS BASIC CONNECTIONS
ENGLISH
BASIC CONNECTIONS
WIRING SPEAKER CABLE
• Peel off the coating of speaker cable as shown below.
Approx. 1 cm
Cut the coating
of cable.
Peel off the edge
of cable.
Twist conductors.
• Wiring with speaker cable.
Turn counter-
clockwise to loosen.
Insert conductor
of cable.
Turn clockwise to
tighten.
• Wiring with “Y” style terminal
Turn counter-
clockwise to loosen.
Insert conductor. Turn clockwise to
tighten.
Notes:
• To prevent damage to circuitry, do not let the bare speaker
wires touch each other and do not let them touch any metal
part of this unit.
• Do not touch the speaker terminals when the power is on.
It may cause you to receive an electric shocks.
• Be sure to connect the positive and negative cables for
the speaker properly. If they are miss-connected, the
signal phase will be reversed and the signal quality will
be corrupted.
CONNECTING OF AC POWER CABLE
1. Plug the supplied AC power cable to the AC IN socket on
the rear panel of the main unit.
AC IN
2. Plug the power cable into an AC outlet.
Connect the player so that the power cord can be
removed easily as a precaution against possible
accidents.