Marantz PM-11S2 Stereo Amplifier User Manual


 
5
NAMES AND FUNCTIONSBASIC CONNECTIONSBASIC OPERATIONS
ADVANCED CONNECTIONS
ADVANCED OPERATIONSTROUBLESHOOTINGOTHERS
ENGLISH
BEFORE USING
USAGE OF REMOTE CONTROLLER
7 Loading batteries
Before using the remote controller for the first time, load the
batteries in the remote controller. The batteries provided are
used to verify the operations of the remote controller only.
1. Remove the battery cover.
2. Insert the batteries with correct +/– orientation.
Two AAA-size (R03) batteries
3. Close the battery cover until it clicks shut.
Cautions on handling batteries
Misuse of the batteries can result in electrolyte leakage,
rupturing, corrosion, etc.
Bear in mind the following points when using batteries.
Remove the batteries from the remote control unit if the unit
is not going to be used for a prolonged period (a month or
more).
Do not use an old battery together with a new one.
Insert the batteries while ensuring that their ª and · poles
are properly aligned with the corresponding markings on the
remote control unit.
Batteries with the same shape may have different voltages.
Do not use different types of batteries together.
• If electrolyte has leaked, thoroughly wipe the inside of the
battery compartment, and then insert new batteries.
• When batteries which are no longer required are to be
discarded, follow the directions (regulations) laid down by the
local authorities in the area concerned for their disposal.
7 Operational range
Operate the unit with the remote controller within the range of
the illustration below.
Approx. 5m
Remote controller
Precautions
• Do not allow direct sunlight, an inverter fluorescent light or
other strong source of light to shine onto the player’s infrared
signal reception window (remote sensor). Otherwise, the
operation of the remote control unit may be disabled.
Bear in mind that operating the remote control unit may cause
other devices operated by infrared rays to be operated by
mistake.
• The remote control unit cannot be operated if the space
between the controller and the player’s remote sensor is
obstructed.
• Do not place any objects on top of the remote control unit.
Doing so may cause one or more buttons to be held down
which will cause the batteries to run down.