Marantz DV7001 CD Player User Manual


 
6
DVD Setup Menu
47
English
HDMI VIDEO
Default setting: AUTO
Selects a suitable video resolution depending on the capability of the connected TV/device to
enhance the HDMI video output.
480P – Progressive output in 480 lines for NTSC TV
576P – Progressive output in 576 lines for PAL TV
720P – Progressive output upscaled to 720 lines
1080 i – Interlaced output upscaled to 1080 lines
1080 P – Progressive output upscaled to 1080 lines
AUTO – The video output will automatically follow the display’s supported resolution
Note
If no display appears on the TV due to an unsupported resolution, use the composite video cable to connect the
DVD system and your TV. Turn on your TV to the correct input channel for the composite video and adjust the
resolution setting to 480P/576P.
The resolution can also be set with the HDMI button on the front panel.
Pressing the HDMI button for three seconds or more toggle the HDMI on/off state (see pages 13, 14).
In general, the larger the number, the higher the resolution.
When the resolution is changed, the image may be corrupted or the output may take longer than normal.
720P/1080i/1080P only supports 60 Hz Video signal.
When 480P/576P has been selected, multi-channel PCM at sampling frequency of 96 kHz cannot be output if the
connected TV, projector, etc. is not compatible with WCLOCK. The multi-channel PCM is converted to 48 kHz/2ch
before being output.