Filter
Top Products
12
ENGLISH
RECORDING (FROM EXTERNAL SOURCE)
The numbers between parentheses refer to the fold-out.
MENU/
STORE
CANCEL/
DELETE
0
987
654
321
CD
CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY
SPACE
SCROLL
FUNCTION
ENTER
Recordable
ReWritable
SOURCEREC TYPE
CLOSE
OPEN/
CLOSE
OPEN/
ERASE FINALIZE
POWER
ON/OFF
PLAY/PAUSESTOP
REC
CDR
CD RECORDER DR6050
PLAY/PAUSESTOP
CD DJ MODE
EASY JOG
PUSH ENTER
CANCEL/DELETESTORE/MENU
PHONES
STANDBY
er
y
t
y
• To check the elapsed recording time, press
DISPLAY
(72). (This can also be done during recording)
• The recorder stops automatically.
yy
yy
y
To stop recording manually, press
99
99
9
STOP
(5) on the
CD-Recorder.
• If 9
STOP
(5) was pressed within 3 seconds after press-
ing
PLAY
on the selected source, no recording will take
place.
• To interrupt recording, press 2/;
PLAY/PAUSE
(6) on
the CD-Recorder.
To resume, press 0
REC
(4) on the CD-Recorder.
After recording the display will show
for sev-
eral seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- With , recordings from DAT, DCC or
recordings made analogously will stop after 20 seconds si-
lence. With , the auto stop mode is
disabled.
Important:
If you want to play the recorded CD-R disc on any regular
CD player, it must first be finalized. See finalizing discs.
There is a chance that the sound will be distorted if the
recording level is set at a value that exceeds 0 dB for dig-
ital sound sources and -12dB for analog sound sources.
The factory settings at the time of shipping are 0 dB for
digital sound sources and -12dB for analog sound
sources.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
CD-SYNC
Autostart recording from external CD player CD-SYNC.
The CD-SYNC feature enables you to make fast and easy re-
cordings of a CD. Track increments are automatically detected
from the source material. Track increments cannot be added
manually. In analog source material a silence of 2.7 seconds or
more is automatically detected as a track increment.
qq
qq
q
Make sure the disc is absolutely free of scratches and
dust particles.
ww
ww
w
Connect the cable from an external CD player to the CD-
Recorder. (see INSTALLATION page 5 and 6.)
ee
ee
e
Press
SOURCE
(12) repeatedly until the selected
source, appears on the display (depending on the digital
connection used):
➔
, or lights up and
, or appears on the
display.
rr
rr
r With the CD-Recorder stopped, press
REC TYPE
(11)
four times: if you wish to record a complete disc or pro-
gram.
➔
start to flash and the display shows
.
• If message also flashes, the digital
connection is incorrect.
tt
tt
t
To start recording, press
PLAY
on the selected source.
➔ The CD-Recorder automatically starts to record. The re-
cording time left appears on the display.
• If
or blinks, the digital connecetion is incor-
rect.
• If, however, you start the source during a track, CD-
SYNC recording starts at the beginning of the next track
or after 2.7 seconds of silence in analog recordings.