Filter
Top Products
10
ENGLISH
RECORDING (FROM INTERNAL CD-DECK)
The numbers between parentheses refer to the fold-out.
MENU/
STORE
CANCEL/
DELETE
0
987
654
321
RANDOMPROG.REPEATSCAN
CD
CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY
SPACE
SCROLL
FUNCTION
ENTER
Recordable
ReWritable
SOURCEREC TYPE
CLOSE
OPEN/
CLOSE
OPEN/
ERASE FINALIZE
POWER
ON/OFF
PLAY/PAUSESTOP
REC
CDR
CD RECORDER DR6050
PLAY/PAUSESTOP
CD DJ MODE
EASY JOG
PUSH ENTER
CANCEL/DELETESTORE/MENU
PHONES
STANDBY
w
er
w
w
w
r
w
Note:
Copy prohibited tracks will be copied analog.
is displayed.
rr
rr
r
To stop recording, press
99
99
9
STOP
(5, 24, 82).
➔
goes out and recording stops.
• If 9
STOP
(5, 24, 82) was pressed within 3 seconds after 0
REC
(4), no recording will take place.
• After recording, the display shows
for several sec-
onds. The Total time indications can differ slightly. However,
no music information is lost.
Note:
In this recording mode, the Pause function is not operative.
Important:
If you want to play the recorded CDR disc on any regular
CD player, it must first be finalized. (See FINALIZING/
UNFINALIZING page 13.)
There is a chance that the sound will be distorted if the
recording level is set at a value that exceeds 0 dB for dig-
ital sound sources and -12dB for analog sound sources.
The factory settings at the time of shipping are 0 dB for
digital sound sources and -12dB for analog sound
sources.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
Normal speed recording
Using the internal CD player.
During the normal speed recording, you can listen to the re-
cording while you are making it.
qq
qq
q
Make sure that the recording disc is absolutely free of
scratches and dust particles.
ww
ww
w
For recording, press
REC TYPE
(11) twice.
• The
label starts blinking. After 3 seconds the
display shows the remaining CD-R(W) recording time on the
left and total time of source on the right. (every 2 seconds
is displayed) Both selection indicators
are lit.
• Press
PROG
(86) on the remote control to select one or
more tracks for recording (see PROGRAMMING page 21):
- rotate the
EASY JOG
(19) key to the required track
number, then press
PUSH ENTER
(19).
or:
- directly select the track number via the
10-keypad
(71)
on the remote control, then press
ENTER
(79).
ee
ee
e
To start recording, press
00
00
0
REC
(4).
➔
lights continuously and the selected track
or program is copied at normal speed. The recording
time left will appear.
• To check the elapsed recording time, press
DISPLAY
(72) on
the remote control. This can be done during recording.
• Recording will stop automatically.