Filter
Top Products
7
ENGLISH
USING THE RECORDER
The numbers between parentheses refer to the fold-out.
Inserting discs
1 Press
//
//
/
OPEN/CLOSE
(6) to open the disc tray.
➔
lights up.
2 Insert a CD, CD-R or CD-RW in the appropriate recess in
the tray, label side up.
3 Press
//
//
/
OPEN/CLOSE
(6) to close the tray.
➔ lights up, followed by and the dis-
play will show the type of disc you inserted.
• If a CD-R(W) is finalized it will show CD on the display.
• If CD-text is available the TITLE/ARTIST will scroll by.
Note:
- Only Audio CDs will be accepted. If a non-audio disc is
inserted, the display shows .
- For recording it is important that the blank disc is completely
free from dust particles or scratches. (see Compact Discs
page 1).
- If you insert a blank or partly-recorded CD-R or unfinalized
CD-RW, the CD-Recorder will calibrate the disc for optimum
recording. During this process the display will first show
and then the number of audio tracks.
Calibration can take up to 25 seconds.
Switching ON and OFF
1 Connect the power cord into the mains.
q
AC IN
2 Press the
POWER ON/OFF
(1) button on the front of the
CD-Recorder to turn it on or off.
w
Recordable
ReWritable
POWER
CD RECORDER DR6000
OPEN/CLOSE
DISPLAY SCROLL
ON/OFF
STANDBY
Using the remote control
1 Open the battery compartment cover.
2 Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as
shown.
3 Replace the cover.
Note:
- We recommend you use 2 batteries of the same type and
condition.
- Always point the remote control directly towards the re-
corder and make sure there.
This remote control can switch “STANDBY ON/OFF” but can-
not switch “POWER ON/OFF” the CD-Recorder.
Batteries contain chemical substances, so they should be
disposed of properly.
DR6000(U)_Eng_P01-10.p65 8/7/00, 1:35 PM7