Marantz DR6000 CD Player User Manual


 
20
ENGLISH
Recordable
ReWritable
POWER
CD RECORDER DR6000
STO
P
REC
PUSH ENTER
EASY JOG
REC TYPE REW FF
FINALIZE
DELETE
CANCEL
MENU
STORE
SOURCE ERASE
OPEN/CLOSE
DISPLAY SCROLL
ON/OFF
qwe w
w
Player does not react
use the
POWER ON/OFF
(1) button on the front of the
Player to switch it off and back on
on display
a power failure has occurred during recording the CD-
Recorder is attempting to repair the disc
If
then appears on the display, the disc
cannot be recorded further, and cannot be finalized. But
it can still be played on the CD-Recorder or another CD-
Recorder.
on a CD-R(W) disc, the track being recorded is lost, but
further recording and finalisation can still be done
OTHER INFORMATIONS
The numbers between parentheses refer to the fold-out.
Diagnostic Program
If the malfunction continues, perform the Diagnostic Program:
1 Switch the recorder off using the
POWER ON/OFF
(1).
2 Simultaneously press the R (18) and Q (19) and switch
the recorder back on using the
POWER ON/OFF
(1).
The display will now indicate ‘
’.
After a few minutes, the message will change to
’ or ‘ ’.
If the
message appears, your recorder is defec-
tive and needs to be repaired. Consult your supplier or
call the Marantz Consumer Line to find the nearest serv-
ice centre. The number of the Consumer Line can be
found in the guarantee booklet.
If the ‘
’ message appears, there is no clear
defect and the malfunction may be a result of misinter-
pretation of the user instructions, an inappropriate disc,
a mechanical defect or an incorrect connection. To
solve this problem, carefully read the user instructions
once again; you can also contact your supplier.
If you cannot solve the problem, go to the nearest serv-
ice centre.
3 Switch off the recorder using the
POWER ON/OFF
(1) to
exit from the Diagnostic Program.
DR6000(U)_Eng_P11-21.p65 8/7/00, 1:37 PM20