Filter
Top Products
14
Getting started
Basic connections Basic operation Specifi cations IndexAdvanced connections Advanced operations Explanation of terms Troubleshooting
ENGLISH
14
Getting started
Basic connections Basic operation Specifi cations IndexAdvanced connections Advanced operations Explanation of termsAdvanced operations Troubleshooting
Setting higher quality sound (Audio
EX function)
You can use the Audio EX function to set higher quality sound.
During stop mode, press [SOUND MODE].
• When [SOUND MODE] is pressed each time, the display switches
sound modes in the following order.
Audio EX 1
Audio EX 2
Audio EX OFF
The default setting
Sound mode
Pitch
control
Digital
output
Display
Audio EX OFF:
Enable
Available *1
*2
On
Audio EX 1:
Plays with a higher
quality sound than
“Audio EX OFF” mode.
Disable Available *2 On
Audio EX 2:
Plays analog audio
output using highest
quality sound.
Disable Not available
Off
(during
playback)
*3
(*1) Digital signals are output only when the pitch control setting is
“Pitch: 0”.
(*2) The “Digital Out” setting of the menu overrides the Audio EX
setting (vpage16).
(*3) When you press
[DISPLAY], the display turns on for about 3
seconds.
Performing menu settings
You can set the following functions. For further information, see the
page indicated in parentheses ( ).
n Peak (Peak level search) (vpage15)
n Edit (Edit mode) (vpage15)
n MP3/WMA Mode (File playback mode setting) (vpage16)
n Digital Out (Digital audio output setting) (vpage16)
n Quick Replay (Quick replay playback) (vpage16)
n Auto Standby (Auto standby mode) (vpage16)
1
During stop mode, press [MENU].
2
Press 2 or 3 to select the menu item you want to set.
3
Press [ENTER].
2
2
2
3
3
32
23
23
3
Peak (vpage15)
Edit (vpage15)
MP3/WMA Mode (vpage16)
Digital Out (vpage16)
Quick Replay (vpage16)
Auto Standby (vpage16)
Playing back at different speeds
(Pitch control function)
You can use the Pitch control function to play back music CDs (CD-DA)
at a different speed (pitch) during playback.
Increasing the play speed
Press [PITCH+].
• “PITCH” will light up and each time the button is pressed, the
playback speed will increase (max +12).
Reducing the play speed
Press [PITCH–].
• “PITCH” will light up and each time the button is pressed, the
playback speed will decrease (min –12).
Returning play to the normal speed
Press [PITCH RESET].
• The “PITCH” indicator on the display goes off and “Pitch: 0” appears
on the main display.
• Press [PITCH RESET] again to restore the original playback speed
setting.
NOTE
• The pitch control function is enabled only when Audio EX mode is
set to “Audio EX OFF” (vpage14).
• Pitch control playback is not possible with MP3 and WMA fi les.