Filter
Top Products
9
ENGLISH
9
Moving to the Beginning of Tracks (Skipping)
GUsing the buttons on the main unitH
During playback, press and hold in <8/6> or <7/9>.
• The disc is skipped the number of tracks equal to the number of
times the button is pressed.
• When you press
<8/6> once, playback restarts from the
beginning of the current track.
GUsing the buttons on the remote controlH
During playback, press and hold in [8] or [9].
• The disc is skipped the number of tracks equal to the number of
times the button is pressed.
• When you press [8] once, playback restarts from the beginning
of the current track.
Playing a Specifi c Track (Direct searching)
Press [NUMBER] (0 – 9) to select the track.
GExampleH : Track 4 : Press number [4] to select Track No. 4.
GExampleH : Track 12 : Press numbers [1] and [2] consecutively to
select Track No. 12.
The number you enter is set about 1.5 seconds after you press the
number buttons. To enter a two-digit number, be sure to press the
two number buttons, one immediately after the other.
Turning off display
Press [DISPLAY].
The DISPLAY OFF indicator lights and the display information goes
off.
NOTE
During stop mode, the display information does not turn off. The
information is turned off only during playback.
To change time display
Press [TIME].
• When [TIME] is pressed each time, the display shows differently
in the following orders.
Track elapsed time
Track remaining time
Total remaining time
Displaying text
The “TEXT” indicator lights when a CD-Text disc is loaded.
• When you press [TEXT], the text information stored on a CD-Text
disc is displayed.
• This unit can display up to 64 characters of text information.
GDisplay of playerH
Text information
Playback CDs
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
1
<LEVEL>
[REPEAT]
[A-B]
[TEXT]
[DISPLAY]
1
[TIME]
[8, 9]
[NUMBER]
(0 – 9)
DISPLAY OFF
indicator