Filter
Top Products
7
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
OTHERS
BASIC
OPERATIONS
ENGLISH
BASIC OPERATIONS
NORMAL PLAYBACK
1. 2. 4.3. 5.
1.
2.
4.
5.
3.
Track numbers
Total number of tracks Total playing time
1. Press the POWER button on the unit or on
the remote controller to turn on the power.
2. Press 0 button on the unit or remote
controller to open the disc tray. Hold the
edge of the disc and place on the tray.
• Do not touch the signal surface of a
disc.
• To play a single CD (8 cm), place the disc
with the indentation at the center of the
tray.
3. To set multiple discs, press DISC SKIP
button on the unit or DISC 3 or 4 button on
the remote controller. With the turn table
on the tray rotating, set the disc one by
one.
4. Press 0 button on the unit or remote
controller to close the disc tray.
5. When 3 button on the unit or remote
controller is pressed, playback starts from
the fi rst track.
• At this time, “3” lights up on the display
window.
• All discs are played
(example) To start playback from the disc 2
Disc 2/fi rst track →.....→ last track
→ Disc 3/fi rst track →.....→ last track
→ Disc 4/fi rst track →.....→ last track
→ Disc 5/fi rst track →.....→ last track
→ Disc 1/fi rst track →.....→ last track
→ Stop
Caution
• Place a disc on each tray correctly. If not, the unit
cannot be operated and discs may be damaged.
• Be careful not to have your fi nger caught when
you close the tray.
If the fi nger is caught, press 0 button to open the
tray.
• Do not insert a disc in the way shown as the
arrow.
• Do not place any other media other than a disc on
the tray.
• Do not pile up discs on a tray. Do not place more
than two disc on a tray.
• Do not force to open/close the tray. Always use 0
button to open/close the tray.
• While the tray is open and rotating, do not touch
or stop the tray with fi ngers.
PAUSE PLAYBACK
Pressing 8 button on the unit or remote controller
pauses the play.
• At this time, “8” lights up on the display
window.
• To restart the playback, press 3 button on the
unit or remote controller.
• Pressing 8 button on the unit or remote controller
again while pausing restarts the playback.
STOP PLAYBACK
Pressing 7 button on the unit or remote controller
stops the playback.
CHANGE DISCS WHILE PLAYING
You can change other discs not being played while
playing a disc.
DISC SKIP
0
0
DISC 3, 4
• While disc 1 is playing, press 0 button to open
the tray and change disc 2, 3, and 4.
To change disc 5, press DISC SKIP button on
the unit or DISC 3 or 4 button on the remote
controller to rotate the turntable on the tray, then
change the disc.
• After changing the disc, make sure to press 0
button to close the disc tray.
t
q
w r
e
q…Disc 1 tray r…Disc 4 tray
w…Disc 2 tray t…Disc 5 tray
e…Disc 3 tray