Filter
Top Products
10
BASIC
CONNECTIONS
BASIC
OPERATIONS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
NAMES AND
FUNCTIONS
OTHERS
ADVANCED
OPERATIONS
ENGLISH
PLAYING TRACKS IN A RANDOM
SEQUENCE (RANDOM PLAY)
Random play is a function to play tracks in random
sequence.
RANDOM
RANDOM
ONE DISC RANDOM PLAY
Random play the chosen disc only.
Light up
1. Press RANDOM button on the unit or
remote controller.
• At this time, “RANDOM” lights up.
2. Press any of the DISC 1–5 buttons on the
unit or remote controller to choose the disc
to be played. Press 3 button on the unit or
remote controller.
• One track is randomly chosen from the
selected disc and played.
ADVANCED OPERATIONS
ALL DISC RANDOM PLAY
Random play all discs on the disc tray.
Light up
1. Press RANDOM button on the unit or
remote controller.
• At this time, “RANDOM” lights up.
2. Press 3 button on the unit or remote
controller.
• A track is chosen from all discs and
played.
• After playing the track, another track
is chosen from all discs randomly and
played.
STOP RANDOM PLAY
When random playback is set, press RANDOM
button on the unit or remote controller.
• At this time, the “RANDOM” indication
disappears and random playback is canceled.
Caution
• When RANDOM button is pressed while a
program is being played, programmed tracks are
played in random sequence.
• If 0 button is pressed during random playback
and the tray is opened, random playback is
canceled.
• Random playback cannot be started while the tray
is open during playback.
PLAYING TRACKS IN A SPECIFIC
SEQUENCE (PROGRAM PLAY)
You can choose tracks or discs to play and program
them in the order you want to listen.
Up to 50 tracks can be registered for program play.
2. 5.
2.
5.
1.
3.
1. While the unit is stopped, press PROGRAM
button on the remote controller to switch to
the Program mode.
• At this time, “PROGRAM” lights up.
Light up
2. Press any of the DISC1-5 buttons on the
unit or remote controller to choose a disc
where the tracks to register are contained.
In this example choose disc 2. (Total number
of tracks: 20)
Light up
3. Use the Numerical buttons on the remote
controller to choose the track number to
register.
In this example choose track 7.
• At this time, the chosen track number
lights up.
Light up Light upProgram number
↓
Total playback time of the tracks programmed
• If programming is performed across several
discs, the total playback time is displayed as “- - :
- -“.
• If the total playback time of the tracks programmed
exceeds 99 minutes 59 seconds, “-- : --” is
displayed.
• When a program is setup with an MP3 or WMA
disc, “-- : --” is displayed for the total time.