Filter
Top Products
33
English
TROUBLESHOOTING
CD Recorder
System does not react.
• CD Recorder is in standby mode.
™
Press any key to activate the CD
Recorder.
• The system is not switched on.
™
Ensure that the ON/OFF button is on.
• Main cable is not connected.
™
Ensure that the mains cable is plugged
in correctly.
• Player does not react.
™
Switch the ON/OFF button on the front
of the player OFF and back ON.
No sound.
• The audio equipments are not
connected or are connected wrongly.
™
Check the audio connections.
™
if using an amplifier, try using a
different source.
Amplifier sound is distorted.
• CD Recorder analog output connection
to amplifier is not correct.
™
Check that the CD recorder analog
output is not connected to the amplifier
Phono input
Playback will not start.
• The disc is not inserted properly.
™
Ensure that the label of the CD is facing
up.
• The disc is dirty or dusty.
™
Clean the disc.
• The disc is defective.
™
Check that the disc is not defective by
trying another disc.
Cannot record.
• The disc is dirty or dusty.
™
Clean the disc.
• Check if CDR(W) is an finalized disc.
™
Unfinalized the disc.
“WRONG DISC” is displayed.
• The disc is not an AUDIO disc,
™
Replace the disc.
“CHECK INPUT” is displayed.
• Wrong input source chosen.
™
Reselect the correct source.
“MEMORY FULL/FINALIZE CD” is
displayed.
• CDRW has to be unfinalized for
recording.
™
Erase text or finalize disc to obtain
memory space.
Recording is distorted.
• Recording level is not correct.
™
Make sure the recording level is
correct.
"DISC RECOVER" on display.
• Power failure has occurred during
recording
™
Wait for the CD recorder to repair the
disc.