Magnavox FW930R Stereo System User Manual


 
23
English
CD RECORDER
Notes:
You can use Shuffle in combination with
repeat all or programmed playback.
REPEAT will be cancelled if you open the
disc tray.
Programming
You can program up to 99 tracks to play
in any desired sequence.
Tracks can be programmed more than
once, but each time counts as a track
(
STEP).
1 In Stop mode, press PROG on the
remote control to enter Program mode.
The
PROGRAM flag starts flashing and
"PROGRAM" appear on the display.
2 Select the required track numbers by
turning EASY JOG left or right
(or Digit
0-9 on the remote control)
and store by
pressing ENTER button .
The track will be stored in the
program.
The track number, total program time
and the number of programmed
tracks (
STEPS) appear on the display.
3 Repeat
step 2
for all tracks to be
programmed.
4 Press STOP Ç or PROG again on the
remote control to end programming.
5 Press PLAYÉ to start programmed
playback.
Notes:
To review the program, press PROG on
the remote control, followed by
à
or
á
with the CD recorder in Stop mode.
If you try to store more than 99 tracks,
"
PROG FULL
" appears on the display.
Clearing a program
1 Press STOP Ç if necessary to stop
programmed playback.
2 Press STOP Ç again to clear the
program.
The
PROGRAM flag disappears from the
display.
The program is also cleared if you open
the disc tray.
Erasing a track from a program
1 In Stop mode, press PROG on the
remote control to enter Program mode.
2 Use à or á to select the track from
which to delete.
The track number and program step
appear on the display.
3 Press CANCEL to erase the track from
the program.
The remaining program steps and the
remaining playing time of the
program will be displayed.
Menu mode
In Menu mode you will have access to a
number of features which are not
available via the regular keys (on the
deck's front and the remote control).
The TEXT submenus allow you to give
names to discs and tracks. The disc and
track names will be displayed during
playback.
In the RECORDING submenus you can
set Auto Track and Balance.
All settings (except Balance) made in
Menu mode will be stored in the deck’s
memory and can be called up and
changed at any time.
General Operation
1 In Stop mode, select CDR.
2 Press STORE/MENU to enter Menu
mode.
"TEXT EDIT" appears on the
display.
3 Rotate EASY JOG to select the
required submenus and press ENTER to
confirm.
4 Rotate EASY JOG to select options in
the submenus and press ENTER to
confirm.
5 Press STORE/MENU to store settings
and return to the submenu.
6 Press STOP Ç to store settings and
exit Menu mode.
Note:
Text can only be edited for unfinalized
discs. (Finalized CDRW discs must be
unfinalized first.)
TEXT SETTINGS
Storing names
1 Select the TEXT EDIT submenu.
"TEXT EDIT" appears on the
display.
2 Press ENTER to confirm.
3 Rotate EASY JOG to select the
required option in the submenu: CD
ARTIST, CD TITLE,TRACK 1 ARTIST,
TRACK 1 TITLE, etc.
4 Press ENTER to confirm.
5 Select the characters by rotating the
EASY JOG button.
To insert a space between characters,
press ENTER without selecting a
character first.
To delete a character, press CANCEL.
6 Press ENTER to store the characters
and move to the next cursor position.
To move to a required cursor position,
press à or á.
7 Press STORE/MENU to store a name
you have entered and return to the
submenu or STOP Ç to exit.
Notes:
A maximum of 60 characters can be
stored per item.