Filter
Top Products
8
Specialty Features (Continued)
Setting the Clock:
To set the clock, press the “Power” button (1) to turn
the unit on and perform the following procedure:
1. Press and hold the “DISPLAY” button (11) until
the display begins to flash.
2. Use the “Clock Setting” knob (3) to adjust the
hours (When selecting hours note the AM or PM
indicator) and minutes as indicated on the con-
trol. Rotate the knob left to adjust minutes and
rotate right to adjust hours.
Display Button:
When the unit is on, press the “Display” (11) but-
ton at any time to display the clock indefinitely. If
you tune to another radio station, the frequency
will be displayed for 5 seconds, then will switch
back to the clock. Pressing the “Display” button
a second time will display the radio frequency
indefinitely. This procedure operates the same in
CD mode.
Minutes
Hours
☛
9900CD Manual 1/20/03 12:19 PM Page 8