6
CD Operation (Continued)
4A. To repeat play of a single song on the CD, press
the “REPEAT” button (5) one time. The “RPT”
indicator will appear in the display area (Figure C).
4B. Press the “REPEAT” button again to stop the
repeat function. The indicator in the display (17)
will disappear.
5. To “Pause” the playing of the disc, press the
“PLAY/PAUSE” button (4) once. To resume play,
press the “PLAY/PAUSE” button again (Figure D).
6. To eject the disc, press the “Eject” button (14).
If the CD is not removed after three seconds it
will be reloaded into the unit.
CD Changer Control (Optional)
1. Load your CD changer with compact discs per
the manufacturer’s operating instructions.
2. Press the “MODE” (13) button until the display
reads “CDC” which indicates that the CD chang-
er is active (Figure A).
3. To change the active CD, press either the “DISC
DOWN” (7) or “DISC UP” (8) buttons to scroll
through your selection of CD’s in the CD chang-
er. If a CD is not in a tray in the changer, the
M9900CD will continue to scroll through the
trays until one is found.
Figure C
Figure D
Figure A
☛
9900CD Manual 1/20/03 12:19 PM Page 6