Linn WAKONDA Stereo Amplifier User Manual


 
To get out of BALANCE mode press
BAL
and
BAL
at
the same time, and the WAKONDA will revert to
VOLUME mode. Or to get to LISTEN mode, press
LISTEN
,
INPUT
or
INPUT
LISTEN When this indicator is lit, the WAKONDA is in LISTEN
control mode, and pressing
INPUT
or
INPUT
will
change the input that you are listening to. If you press
RECORD
while already in LISTEN control mode the
WAKONDA will enter RECORD control mode.
RECORD When this indicator is lit, the WAKONDA is in RECORD
control mode and
INPUT
or
INPUT
will display and
control the input that is being sent out of the TAPE-
OUT sockets.
If the
RECORD
light is flashing, this means the WAKONDA
is in RECORD-LOCK mode and will not respond to
remote control commands from other rooms. To cancel
RECORD-LOCK mode, press
INPUT
and
RECORD
simultaneously.
MONO When this indicator is lit the WAKONDA is operating in
MONO. To get back to stereo, press the pair of keys
marked
MONO
-- -- When no keys have been pressed for around 30
seconds, the WAKONDA will go to standby and the
display will show two dashes. To awake up the
WAKONDA the best thing to do is press either
VOL
or
LISTEN
and then check the display to see what state the
WAKONDA is in.
15