Linn WAKONDA Stereo Amplifier User Manual


 
The display will show the input you have selected and the
LISTEN
indicator will light. There is a short delay as you step through inputs
while the volume fades down and then up again between inputs.
While the volume is fading, the
LISTEN
indicator dims. The lower the
volume control setting the shorter this delay will be.
VOL VOL
TO CHANGE THE VOLUME
press and hold the
VOL
or
VOL
Keys until
the desired volume level is reached. The
VOLUME
indicator will light,
and the volume will be displayed as a number from 0 to 60. Above step
4, each volume step is 1 dB.
MUTE
TO MUTE
the WAKONDA press the
MUTE
key. The music will fade out
and the
MUTE
indicator will light.
TO UNMUTE
the WAKONDA press the
MUTE
key again. The previous
volume setting will be displayed, the music will fade up and the
MUTE
indicator will go out. Pressing either of the
VOL
or
VOL
keys will
also unmute the WAKONDA.
LISTEN
TO DISPLA
Y THE CURRENT INPUT when the display is asleep or is
showing the volume, press the
LISTEN
key once. The
LISTEN
indicator will light and the current input will be displayed. Pressing
INPUT
or
INPUT
will also display the current input, if it is not already
displayed.
RECORD
TO SELECT AN INPUT TO RECORD
press the
RECORD
key. If the
LISTEN indicator lights, press
RECORD
again. The
RECORD
indicator will
light, and the display will show the input currently selected for
recording. Select the input you want to record by using the
INPUT
or
INPUT
keys. The selected input is now fed out of both tape
outputs. You can listen to one source while you record another.
INPUT
and
INPUT
will continue to control the input you are
recording until you
11