Filter
Top Products
▲
RECORD LOCK
TO LOCK THE RECORD INPUT
if a KNEKT multi-room line driver option
is fitted press the
INPUT
and
RECORD
keys at the same time. This will
stop remote control commands from other rooms in the house
affecting your WAKONDA and potentially disrupting the recording.
The RECORD light will flash softly to indicate that the record input has
been locked. When you have finished recording, press this pair of
keys again to enable remote control from other rooms. The RECORD
light will stop flashing. Without the line-driver fitted, this pair of keys
has no effect.
USING THE REMOTE CONTROL
The WAKONDA is supplied with a
standard handset which controls the
amplifier and provides basic control for
other Linn source components and the
Linn KAIRN. The larger handset supplied
with the other Linn products may also be
used with the WAKONDA.
Using the handset is very simple and
gives you single key selection of listen
and record sources, balance mono and
mute.
13