Linn PRE- AMPLIFIER Stereo Amplifier User Manual


 
Using the AKURATE KONTROL with a Linn UNIDISK
player
There are advantages in operation when using the AKURATE
KONTROL with a Linn UNIDISK player:
When a disc is loaded into the UNIDISK player and the Linn Disc
source is selected as the source on the AKURATE KONTROL,
the AKURATE KONTROL will automatically switch to the required
input for the loaded disc.
The AKURATE KONTROL will choose an appropriate surround
sound format for a disc’s audio stream.
IIff yyoouu wwiisshh ttoo uussee yyoouurr AAKKUURRAATTEE KKOONNTTRROOLL wwiitthh aa LLiinnnn UUNNIIDDIISSKK
ppllaayyeerr,, ffoollllooww tthhee iinnssttrruuccttiioonnss bbeellooww..
1. Switch off all equipment.
2. Connect
the UNIDISK player’s FRONT A or B, SURR, CENTRE and
SUB line output connectors to the 5.1 GROUP input on the
AKURATE KONTROL (requires 6 RCA phono-to-phono leads)
the TOSLINK or SPDIF output from the UNIDISK player to
one of the TOSLINK or SPDIF inputs on the AKURATE
KONTROL (requires a Toslink lead or digital audio lead).
3. Connect the video outputs you wish to use from the UNIDISK
player to your display device.
4. Connect the RS232 product-to-product lead (supplied with the
AKURATE KONTROL) from the AKURATE KONTROL’s RS232
OUT to the UNIDISK player’s RS232 IN.
5. Connect the AKURATE KONTROL’s REMOTE OUT to the
UNIDISK player’s REMOTE IN (requires an RCA phono-to-
phono lead).
6. Switch on all equipment.
6. Enter User Options on your AKURATE CD.
Set –
Front Panel IR Commands to
IIGGNNOORREEDD
Channel Setup to
55..11 CCHHAANNNNEELL
RS232 Events to
EENNAABBLLEEDD
RS232 Baud Rate to
99660000
7. Exit User Options.
8. Enter the Speaker setup menu on the AKURATE KONTROL.
Configure the menu as appropriate for the loudspeakers in
your system.
9. Enter Source setup. Set ANALOG 1, 2 and 3 to
NNOONNEE
.
Select ANALOG GROUP and alter the SURROUND
CHANNELS setting if required (see SURROUND CHANNELS,
page 9).
Save settings.
10. Enter General setup.
11. Enter the RS232 Setup sub-menu.
Set –
Baud Rate to
99660000
Parity to
EEVVEENN
Data Bits to
77
Stop Bits to
11
RS232 Events to
((eeiitthheerr s
seettttiinngg))
Save settings.
12. Enter the Linn Disc setup menu and set ANALOG SOURCE
to
AANNAALLOOGG GGRROOUUPP
.
Save settings and exit setup.
15AKURATE KONTROL
ENGLISH
AKURATE KONTROL pre-amplifier - english 15/5/07 15:17 Page 23