Linn PRE- AMPLIFIER Stereo Amplifier User Manual


 
ENGLISH
7AKURATE KONTROL
CCEENNTTRREE
For a full-range centre loudspeaker, set to
LLAARRGGEE
.
For a centre loudspeaker with limited bass response, set to
SSMMAALLLL
.
If there is no centre loudspeaker, set to
NNOONNEE
.
Default setting:
NNOONNEE
SSUURRRROOUUNNDD
For full-range surround loudspeakers, set to
LLAARRGGEE
.
For surround loudspeakers with limited bass response, set to
SSMMAALLLL
.
If there are no surround loudspeakers, set to
NNOONNEE
.
Default setting:
NNOONNEE
SSUURRRROOUUNNDD BBAACCKK
For full-range surround back loudspeakers, set to
LLAARRGGEE
.
For surround back loudspeakers with limited bass response, set
to
SSMMAALLLL
.
If there are no surround back loudspeakers, set to
NNOONNEE
.
Default setting:
NNOONNEE
SSUUBBWWOOOOFFEERR
If you have connected a subwoofer, set to
YYEESS
.
If you have not connected a subwoofer, set to
NNOO
.
Default setting:
NNOO
Select
SSAAVVEE
to save your changes and return to the SPEAKER
SETUP menu.
Select
BBAACCKK
to return to the SPEAKER SETUP menu without
saving changes.
Select
EEXXIITT
to leave setup (if changes have been made and SAVE
has not been selected, you will be prompted to save or not save
the changes).
DDIISSTTAANNCCEE
Accesses the SPEAKER DISTANCE sub-menu.
DDIISSTTAANNCCEE UUNNIITTSS
Select the units for loudspeaker distance measurements.
Options:
FFEEEETT,, MMEETTRREESS
Default setting:
FFEEEETT
SSPPEEAAKKEERR DDIISSTTAANNCCEE
In order to ensure that sound from all loudspeakers in your system
reaches you at the same time, you must inform the AKURATE
KONTROL as to the distance each loudspeaker is from your
seating position. The AKURATE KONTROL will then add a time
delay to the appropriate loudspeakers.
Set the distance from your seating position for all loudspeakers in
your system.
Range:
00 fftt ((00..00 mm)) ttoo 2277 fftt ((88..22 mm))
Default setting:
66 fftt ((11..88 mm))
Select
SSAAVVEE
to save your changes and return to the SPEAKER
SETUP menu.
Select
BBAACCKK
to return to the SPEAKER SETUP menu without
saving changes.
Select
EEXXIITT
to leave setup (if changes have been made and SAVE
has not been selected, you will be prompted to save or not save
the changes).
AKURATE KONTROL pre-amplifier - english 15/5/07 15:17 Page 15