Filter
Top Products
11
Use the digital outputs for connecting to digital recorders,
processors etc. The digital outputs can all be switched off if they
are not required. See ‘Using the Ikemi and Genki’.
The Sync Link™ connector is only of use with a Linn DAC, such as
the Numerik.
The remote in/out connectors are for use in a Linn Knekt system. If
you have the optional RS232 interface see the accompanying
information for it’s use.
GENKI.
The Genki has two identical pairs of fixed level outputs and two
identical pairs of variable level outputs. Use one pair of the fixed
level outputs if you already have a high quality control amplifier.
The other fixed output can be used to connect to other
components, for example a multiroom distribution system.
If you do not have a control amplifier you can connect one pair of
the variable level outputs directly to your power amplifier. The
other pair can feed a power amplifier in another room, or even use
both pairs with two matched power amplifiers to bi-amp your
speakers!
The SPDIF digital output is for connecting to digital recorders,
processors etc. The digital output can be switched off if not
required. See ‘Using the Ikemi and Genki’.
Mains supply.
Connect the mains lead to a suitable earthed power outlet.