Filter
Top Products
7
Setting up the
IKEMI and GENKI
This chapter explains how to unpack your CD player, and how to
set it up with your other hi-fi components.
Unpacking
The IKEMI and GENKI are supplied with complete with the
following accessories:
• A remote control handset
• A mains lead
• Mains fuses
• This manual
• Audio interconnect cables
We recommend you retain the packaging in case you need to
transport the CD player at a later date.
WARNING: Do not connect the mains supply until you have
verified that the CD player is set to the correct voltage for your
mains supply.
The IKEMI and GENKI are factory-set for a 230 volts mains supply
and must not be connected to a mains supply before being
adjusted for your local voltage, and fitted with the appropriate
fuses. To set the voltage, using a flat blade screwdriver, turn the
voltage selector on the mains inlet module to display the correct
setting for your country:
• 230V for countries with 230V or 240V supplies.
• 115V for countries with 100V or 115V supplies.