Filter
Top Products
10
Connecting the IKEMI and GENKI
The following diagram shows the rear panel connections of the
Ikemi and Genki.
Switch OFF.
Always switch off all equipment before changing any connections
as surges may cause serious equipment damage.
IKEMI.
Analogue outputs.
The Ikemi has two identical pairs of single ended (RCA phono
socket) outputs. Use one to connect to your main control amplifier,
and one for connection to other components, for example a
multiroom distribution system.
If your control amplifier has balanced inputs you may prefer to use
the Ikemi balanced outputs, particularly if there is more than a few
metres between the Ikemi and the control amplifier.