Filter
Top Products
ENGLISH
9AKURATE KONTROL
NNAAMMEE
You are able to give the source a name which will be shown on
the display when that source is selected.
To change the flashing character:
• Repeatedly press or hold / on the handset or front
panel.
The following characters are available: A to Z, 0 to 9, space.
To move to the next or previous character:
• Press or .
When you have finished inputting the name, press or
SSEELLEECCTT
.
Default setting:
((nnaammee ooff bbaacckk ppaanneell ccoonnnneeccttoorr,, ‘‘AAKKUURRAATTEE CCDD’’
oorr ‘‘PPHHOONNOO’’))
Note:
The name can be up to twelve characters long.
TTYYPPEE
Select a type for this source. These are the types that are shown
in blue above the bottom two rows of keys on the handset.
Options: DVD, CD, AUX (auxiliary), TUNER, TV, DIGITAL, PHONO,
SAT (satellite), NONE
Default setting:
AAUUXX
(Except for inputs ANALOG 1 which is set to
CCDD
, ANALOG 6 which is set to
PPHHOONNOO
, and ANALOG GROUP
which is set to
NNOONNEE
.)
Note:
The type for the Linn Disc source (see Linn Disc setup, page 13) is
DVD. It is not possible to change the type for this source.
VVOOLLUUMMEE OOFFFFSSEETT
Volume Offset is for adjusting the volume of a source in
comparison to other sources. You may want to adjust Volume
Offset if, for example, your tuner sounds quieter than your CD
player when played at the same volume setting.
Range:
--1155 ttoo 1155
(in 0.5 steps). No volume offset equals 0.
Default setting:
00
SSAATT ((ssaatteelllliittee)) SSOOUURRCCEE -- aapppplliieess ttoo ddiiggiittaall ssoouurrcceess oonnllyy
Set to
YYEESS
if this source is a satellite or cable TV receiver. Setting
to
YYEESS
will stabilise the audio signal when the channel on the
receiver is being changed. Set to
NNOO
if this source is not a satellite
or cable TV receiver.
Options:
YYEESS,, NNOO
Default setting:
NNOO
SSUURRRROOUUNNDD CCHHAANNNNEELLSS
If you are setting up the ANALOG GROUP source, or are adding a
Linn UNIDISK player and have a 7.1 loudspeaker configuration,
you are able to select whether to use your side surround or back
surround loudspeakers when listening to a 5.1 channel audio
source.
Set to
SSUURRRROOUUNNDD
to send the surround audio signal to your side
surround loudspeakers.
Set to
SSUURRRROOUUNNDD BBAACCKK
to send the surround audio signal to
your back surround loudspeakers.
Default setting:
SSUURRRROOUUNNDD
Select
SSAAVVEE
to save your changes and return to the SOURCE
SETUP menu.
Select
BBAACCKK
to return to the SOURCE SETUP menu without
saving changes.
AKURATE KONTROL pre-amplifier - english 15/5/07 15:17 Page 17