Linn Akurate Kontrol Pre-Amplifier Stereo Amplifier User Manual


 
ENGLISH
4 AKURATE KONTROL
AANNAALLOOGGUUEE AAUUDDIIOO
OOUUTTPPUUTTSS
TTAAPPEE OOUUTT
AANNAALLOOGGUUEE AAUUDDIIOO IINNPPUUTTSS::
11 ttoo 33//55..11 GGRROOUUPP
AANNAALLOOGGUUEE AAUUDDIIOO IINNPPUUTTSS::
44 ttoo 66
SSPPDDIIFF:: OOUUTT,, IINNPPUUTTSS 11 ttoo 33
TTOOSSLLIINNKK:: OOUUTT,, IINNPPUUTTSS 11 ttoo 33
EEAARRTTHH GGRROOUUNNDD
One 7.1 analogue audio output. The SURR outputs are for connection to the two surround loudspeakers in
a 5.1 system. The SURR BK outputs are for connection to the two additional loudspeakers in a 7.1 system
– located at the rear of the room.
For two-channel systems, use the FRONT outputs (and SUB if required) only
One pair of analogue outputs for connection to a recording device e.g. DAT recorder
Three stereo analogue audio inputs or one 5.1 analogue audio input
Three stereo analogue audio inputs. Input 6/PHONO is for the connection of a turntable
One electrical digital audio output and three inputs
One optical digital audio output and three inputs
For connecting the earthing lead from the tonearm cable of a turntable. Also for connecting the unit to an
earthing terminal if no mains earth is available
9
8
10
11
12
13
14
Switch off the AKURATE KONTROL before connecting plugs to, or disconnecting plugs
from, the back panel to avoid generating an electrical surge that may damage the unit or
other components in your system.
AKURATE KONTROL pre-amplifier - english 15/5/07 15:17 Page 12