Filter
Top Products
ENGLISH
Connecting
The first stage in setting up your AKURATE KONTROL is to connect
your sources, power amplifier(s) and other peripheral devices to the
AKURATE KONTROL.
1. Ensure your AKURATE KONTROL and all components that you
will be connecting to it are disconnected from the mains power
supply.
2. Connect your source components, power amplifier(s) and any
communication/control devices you wish to use, referring to the
back panel diagram on page 3.
3. Connect the AKURATE KONTROL to the mains power supply
and turn the unit on using the switch on the back panel. For the
next 10 seconds or so the AKURATE KONTROL will configure
itself. During this time three dots will be shown on the display.
4. Wait until the three dots are replaced by the symbol, then
press the key on the front panel or handset.
The main stage in setup is configuring the AKURATE KONTROL to
suit your requirements. This is achieved using the setup menus. How
to configure the AKURATE KONTROL is explained in the rest of this
chapter.
Setup menus
The setup menus enable you to configure your AKURATE KONTROL
for all sources it is connected to, the loudspeakers in your system and
much more. To take advantage of your AKURATE KONTROL’s
features, please take the time to configure your unit correctly.
The setup menus are divided into five categories and are accessed via
the MAIN MENU:
SSPPEEAAKKEERR SSEETTUUPP
For configuring the AKURATE KONTROL for the number, size and
distance of the loudspeakers in your system, and for calibrating their
volume level.
SSOOUURRCCEE SSEETTUUPP
For configuring sources on the AKURATE KONTROL.
AAUUDDIIOO SSEETTUUPP
For configuring the audio output of the AKURATE KONTROL.
GGEENNEERRAALL SSEETTUUPP
For adjusting general settings on the AKURATE KONTROL.
LLIINNNN DDIISSCC SSEETTUUPP
For adjusting the input settings if you are using a Linn AKURATE CD
player as a multi-channel source, or a UNIDISK player, with the
AKURATE KONTROL.
In addition, the AKURATE KONTROL features an INSTALLER MENU
for saving the configuration of the unit as set in the above menus, and
restoring the factory defaults. For full information see Installer menu,
page 14.
5AKURATE KONTROL
AKURATE KONTROL pre-amplifier - english 15/5/07 15:17 Page 13