LightSpeed Technologies X12 Speaker System User Manual


 
LightSPEED Technologies • Wireless Sound Solutions • Toll Free: 1-800-840-3662
25
Wireless Transmitter
Belt-pack
Charging the Batteries (NiMH Rechargeable Batteries ONLCharging the Batteries (NiMH Rechargeable Batteries ONL
Charging the Batteries (NiMH Rechargeable Batteries ONLCharging the Batteries (NiMH Rechargeable Batteries ONL
Charging the Batteries (NiMH Rechargeable Batteries ONL
Y):Y):
Y):Y):
Y):
Make sure there are NiMH Rechargeable Batteries in the transmitter before plugging in the charger.
WARNING: Do not attempt to charge alkaline batteries. They can
overheat and expand, creating a significant hazard and damaging
the transmitter.
(This is not covered by warranty.)
Transmitte
r
Charger
Charger
Connector
Charger Status LED
• RED = charging in progress
• GREEN = batteries fully
charged
LightSPEED
•Switch the transmitter power off.
•Insert the small DC plug into the
jack on the side of the transmitter
labeled “CHG”.
•Plug the other end of the charger
into any standard 110 VAC outlet.
•The Red LED on the charger will
light indicating charge is in process.
•When the batteries are fully
charged, the light on the charger
will turn green.
A full charge can
take up to 8 hours.
Operating Instructions
LightSPE
E
D
CONNECTING THE MICROPHONECONNECTING THE MICROPHONE
CONNECTING THE MICROPHONECONNECTING THE MICROPHONE
CONNECTING THE MICROPHONE
LightSPEED offers various types of microphones that can be used with this system.
To connect the microphone, simply insert the microphone connector into the TA4F
connector on top of the transmitter. To remove, press the black button on the
microphone connector and pull out.
MICROPHONE OPTIONSMICROPHONE OPTIONS
MICROPHONE OPTIONSMICROPHONE OPTIONS
MICROPHONE OPTIONS
The BP-900 Transmitter can be used with either a lapel style microphone or a headset
microphone. Both plug into the top of the transmitter as shown.
Headset MicrophoneHeadset Microphone
Headset MicrophoneHeadset Microphone
Headset Microphone
Several varieties of headset microphones are available
(pictured is the LightSPEED TK-250).
Simply connect the microphone cord directly into the jack on top of the transmitter and place
the headset around the back of the head.
For optimal sound, position the microphone just
beside the mouth.
Lapel MicrophoneLapel Microphone
Lapel MicrophoneLapel Microphone
Lapel Microphone
Several varieties of lapel microphones are available
(pictured is the Audio Technica 831).
Simply
connect the microphone cord directly into the jack on top of the transmitter and clip the microphone
to lapel or collar.
For optimal sound, position the microphone as close to the mouth as possible.
Mic IN