Filter
Top Products
22 Installation
Installation
3
[576i]
Outputs 576 lines of interlaced video.
[576p]
Outputs 576 lines of progressive video.
[720p]
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
[Audio] Menu
Speaker Setup
Make the following settings for the built-in 5.2
channel surround decoder.
1. Select [Speaker Setup] on the [Audio]
menu.
2. Press ENTER ( )
The [SPEAKER] menu appears.
3. Use
I
/
i
to select the desired speaker.
4. Adjust options using
U
/
u
/
I
/
i
buttons.
5. After adjusting the desired options, press
RETURN (
O
). The menu moves to the
previous screen.
[Speaker]
Select a speaker that you want to adjust.
NOTE
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
[Size]
Since the speaker settings are xed, you
cannot change the settings.
[Volume]
Press
I
/
i
to adjust the output level of the
selected speaker.
- Front L/R : 0 ~ -5
- SubWoofer, Rear L/R, Center : 5 ~ -5
[Distance]
After you connected speakers to your unit,
set the Distance between the speakers and
your listening point if the distance of Center
or Rear speakers is bigger than the distance
of Front speakers. This allows the sound
from each speaker to reach the listener
at the same time. Press
I
/
i
to adjust the
Distance of the selected speaker. This
distance is equivalent to a dierence of the
distance between Center or Rear speaker
and Front speakers.
[Speaker Test Start]/ [Speaker Test Stop]
Select [Speaker Test Start] by using the
U
/
u
and press ENTER ( ). Press ENTER ( )
again to stop. Adjust the volume to match
the volume of test signals memorized in the
system.