Filter
Top Products
35Installation
3
Installation
Wireless Network Setup
Before setting the wireless network, you need
to:
– connect the broadband internet to the
wireless home network.
– set the access point or wireless router.
– note the SSID and security code of the
network.
For the wireless network connection, the
player needs to be set up for network
communication. This adjustment can be done
from the [Setup] menu. Adjust the [NETWORK]
setting as follow. Setting up the access point
or the wireless router is required before
connecting the player to the network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (
).
2. The [Connection Setting] menu appear on
the screen. Use
U
/
u
to select [Wireless] and
press ENTER (
).
3. Selects [Yes] and press ENTER ( ) to
continue. The new connection setting
resets the current network settings.
4. The player scans the all available access
points or wireless routers within range and
display them as a list. Use
U
/
u
to select an
access point or wireless router on the list,
and then press ENTER ( ).
If you have security on your access point
or wireless router, verify that the WEP or
WPA key that was entered into the player
matches the router’s information exactly.
You need to input the security code as
necessary.
NOTE
WEP security mode generally have 4 keys available
on an access point or wireless router’s setting.
If your access point or wireless router use WEP
security, enter the security code of the key “No.1” to
connect on your home network.
HX995TZW-FD.BPANLLK_ENG_3803.indd 35HX995TZW-FD.BPANLLK_ENG_3803.indd 35 10. 10. 06 11:0710. 10. 06 11:07