Filter
Top Products
14
Tape Playback
Basic Playback
1.
Press FUNCTION repeatedly to appear
TAPE indicator.
2. Open cassette deck by pushing
STOP/EJECT(
x
/
Z) button.
3. Insert a cassette with the tape side to the
bottom and then close deck.
4. Press PLAY (
B
).
To Stop Play
Press STOP/EJECT (
x
/
Z
) during playback.
To Pause Play
Press PAUSE (X) during playback.
Press this button again it to resume play.
To Play Fast Rewind or Fast Forward
After pressing REWIND/FAST FORWARD
(
bbbb
/
BBBB
) on the front panel during
playback or stopping.
AUTO STOP DECK
After auto stop deck plays only front side, the
unit stops automatically
.
Recording
Wind the tape to the point recording starts.
(Use only normal tapes.)
Basic Setting
1.
Select the function (MP3/CD, TUNER/BAND
or AUX) you want to record.
2. Open the cassette deck and insert a blank
cassette into the cassette compartment.
Recording from Radio, CD or Auxiliary
source
1.
Press FUNCTION button to select desired
recording source, and then press RECORD
(z) button.
The recording begins.
For your reference
When you press RECORD (z) button,
PLAY(
B
) button is pressed automatically.
2. To pause recording
Press PAUSE (X) button during recording.
Press PAUSE (X) button again to resume
recording.
3. To stop recording
Press STOP/EJECT (
x
/Z).
CD to Tape Synchronized Recording
The CD synchro recording function dubs a com-
plete CD and programmed titles automatically
into a cassette.
1. When you select CD function, press
RECORD(z) button.
“REC” appears and “ ” displays in
the display window.
2. The synchronized recording is started
automatically after about 8 seconds.
otes
• If you wish to record from the desired track,
select the desired track with CD
SKIP/SEARCH (.m/M>) before
commencing CD synchro recording.
• The function change is not possible during
recording.
AP_LX-M150A(ENG) 3/2/06 9:54 PM Page 14