Filter
Top Products
Specifications
SPECIFICATIONS
Microphone Inputs: (2) Female XLR Pin 2 Hot
Input Impedance: 600 Ohms balanced
Phantom Power: +48 Volt
GAIN: +50 dB
EIN: −120 dB A-weighted @ 50dB gain (150 Ohm source impedance)
Maximum Input Level: +18 dBu
Frequency Response: +0, −0.2 dB 20 Hz - 20 kHz, ref. 1 kHz
THD+N: <.005%, 20 Hz - 20 kHz
Insert Inputs: (2) 1/4" TRS
Send Level (tip): +19 dBu maximum
Maximum Return Level (ring): +19 dBu maximum
Line Inputs: (2) 1/4" TRS balanced or unbalanced
Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced
Maximum Input Level: +22 dBu
Frequency Response: +0, −0.2 dB 20 Hz - 20 kHz, ref. 1kHz
THD+N: <.009% A/D, 20 Hz - 20 kHz
Instrument Input: (1) 1/4" mono jack
Input Impedance: 1 MOhm unbalanced
Maximum Input Level: +19 dBu
Frequency Response: +0, −0.25 dB 20 Hz - 20 kHz, ref. 1 kHz
THD+N: <.0125% A/D
Crosstalk: <−74dB any input or output to any recording channel, 20 Hz-20 kHz
<−95dB at 1 kHz typical
Line Outputs: (2) 1/4" TRS balanced or unbalanced
Level: +19 dBu maximum (+4 dBu nominal input = −15 dbFS)
Impedance: 110 Ohms
Headphone Output: (1) 1/8" stereo jack 100 mW per channel at 50 Ohms
MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out
Sample Rate: 44.1 kHz or 48 kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 104 dB typical, A-weighted, 20 Hz - 20 kHz
D/A (24 Bit) 109 dB typical, A-weighted, 20 Hz - 20 kHz
A/D/A (24 Bit) 103 dB typical, A-weighted, 20 Hz - 20 kHz
Analog Path: 118 dB typical, A-weighted, 20 Hz - 20 kHz
USB Type B Socket: Version 1.1, Version 1.1 hubs are not supported
Power Requirements: USB powered
Dimensions: XXX x XXX x XXX
Weight: XXX lbs.
Lexicon engineers are constantly working to improve the quality of our products.Specifications are therefore
subject to change without notice.
34